Thread Tools Display Modes
Old 03-01-2019, 05:36 PM   #1
Senior Member
Join Date: Mar 2018
Location: Arizona
Posts: 124
SOLD: 2007 Ford E-350 XLT Superduty 6.0 (4x4 Project)

I have a E350 van with low miles, my intention was to convert it into 4x4 but priorities have changed and it's not happening anytime soon. I love working on vehicles and maintain and upgrade all my vehicles as a hobby.

Below are all the details of the van, Upgrades I've done and the 4x4 conversion parts it comes with. I'll add more info as I recall more and can provide more pics via email. Van is mechanically 100% with 0 issues! I'm in no hurry to get rid of it so no low ball offers please.

2007 Ford E 350 RB
Miles: 50,xxx miles
Engine : 6.0 PSD Diesel
Transmission: 5R110
Title: Clean, in my name
No leaks, No Squeaks
No rust, Always been in arizona
Has rear A/C and heat
Location: Phoenix, Arizona
Price: $22k

Maintenance/ Upgrades:

Regular oil changes with Rotella T6 and Motorcraft Filter
Both Fuel Filter changed with Motorcraft (2.5 k mile ago)
Blue spring upgrade for fuel system
Transmission fluid change with Motorcraft and upgraded filter and transmission pan from 2008+ F250
Upgraded starter with the Ford 6.4 starter
Hydroboost brake conversion (greatly increased stopping power)
Front End Conversion with 2008+ Model
Coolant flushed and refilled with Rotella ELC (ECT and EOT Deltas is town are <2 F, At Highway Speeds about 7 F.
HID Hi/ Low Conversion
New Motorcraft Alternator about 1k mile ago
Installed RFID Immobilizer
3 Captain Seats with brackets, the brackets let you take the seats on/off the van easily
3rd row bench seat that converts into bed.

4x4 Conversion Stuff comes with the vehicle

Complete MG Metal Works 4x4 conversion Kit ((Kit has all the necessary brackets to put in a f-250 superduty solid axle infront)
Fox Shocks for front
Fox Stabilizer Shocks
Moog Coil Springs for front
Moog Spring retainers
Moog Spring isolaters
Ford Bump stops and Bump stop brackets for front
Ford Brake hoses
4 Nitto Terra Grappler ( 35)
4 Ford Factory 17 rims
2014 F250 Dana 60 with about 55k miles, comes complete with Calipers, Rotors, Radius Arms and New Akebono Brake PADs
2010 Sterling 10.5 with about 120k miles
NV271 transfer case with lever about 65k mile
BushWacker Fender flares
Front drive Shaft
Complete set of Fasteners (Nuts, Bolts, Washers etc) as recommended by MG Metalworks from McMaster
Attached Thumbnails
IMG_20190301_164505.jpg   IMG_20190301_164454.jpg   IMG_20190301_164557.jpg   IMG_20190301_164536.jpg   IMG_20190301_171222.jpg  

IMG_20190301_164622.jpg   IMG_20190301_171231.jpg  

karma is online now   Reply With Quote
Old 03-02-2019, 09:58 AM   #2
Junior Member
Join Date: Mar 2016
Posts: 1
PM sent with my contact info.

MAJoplin is offline   Reply With Quote
Old 03-13-2019, 12:34 PM   #3
Senior Member
Join Date: Mar 2018
Location: Arizona
Posts: 124

The message you have entered is too short. Please lengthen your message to at least 10 characters
karma is online now   Reply With Quote
Old 03-29-2019, 08:16 PM   #4
Senior Member
Join Date: Mar 2018
Location: Arizona
Posts: 124

The message you have entered is too short. Please lengthen your message to at least 10 characters.
karma is online now   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Powered by vBadvanced CMPS v3.2.3

This website is not affiliated with or endorsed by Sportsmobile SIP or any of its affiliates. This is an independent, unofficial site.

All times are GMT -6. The time now is 01:38 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.