I'm bringing this back up to the top as it looks like I'm about 99% going to have a hard top put on in 3 weeks on 11/27. I'm going to let Fiberine pull the pop-top off, and being that the way this one goes on as a fiberglass topper, there's no guarantee as to how the fiberglass is going to peel away from the metal roof. If you want to meet up at Fiberine at 4:00PM sharp on 11/27 and make an offer on it, come on down, bring cash and a trailer!
Can you measure the length from front to back and side to side from the widest spot. I want to see if it will fit inside my van at an angle. IF I decide on it and we meet on a price, I do not want to deal with a trailer in traffic on the Wed. before Thanksgiving coming out of the Hawthorne area in Los Angeles! You have no idea what L.A. traffic looks like till that day!
It definitely won't be fitting inside your van. Measure how wide your roof is and measure the rear doors. I transported one upside down on top of my van, on a roof rack. It was no small task getting it up there. Best bet would be a trailer.
I realize the width. I want to measure it because the GT top is very flat maybe 3-4 inches of height if that. It may fit diagonally / from top corner to opposite side floor. I will have no interior seats and I have no build up yet, this is why I would like to know the widest point width. I hauled three fiberine tops on my pickup with 2x4's cut wider than the bed and chocks screwed to under the 2x4's between bed side edges so I know that will work but I wanted to stay in LA Wed. night at my dads. The pickup is only a two seater 3 max. This is why I want it inside for security reasons. They will steal dirty diapers out of your open bed in LA. My van is an EB I believe your top is RB so length wise it should be good. I can always put my full length roof rack back on to haul it but again, security. Please just throw a tape measure from one side to the other and approx length to be sure. Thanks
The top is on an EB, but extends from just behind the drivers seat (just about even with the barn doors) all the way to the back of the van. Width is pretty much gutter rail to gutter rail (maybe minus an inch or so) So it's WIDE!
Linear Mode
