How to Install Fender Flares?

[MrHenrietta]

I couldn't find a thread or youtube on a Bushwacker Fender Flare Install for and E-350. Is there a guide out there somewhere?

[Ocsmb]

Double sided tape and some screws. That's it.

[MrHenrietta]

Originally Posted by Ocsmb

Double sided tape and some screws. That's it.

Thanks. They arrive on Friday. Just wasn't sure If there was any drilling involved. If that was the case I was thinking about having my local shop install.

[Ocsmb]

Even I can install them.

Actually comes with a rubber tape that you push along the edges between the fender flare and body. Then uses same screw holding in your existing plastic wheel well lining.

That's how it was for my f250. Pretty sure it's the same for the e-van

[yvrr]

SMB West installed the ones on our 2001 Ford but I still have the instructions. Let me know if you'd like a copy...

[pinz712]

We just did ours tonight. Front uses ford screws. Rears use self taping. No holes through the side of the van all the screws are inside the wheel well so if you mess up only you will know.

[MrHenrietta]

Just installed them. Front was just screw in. Rear I had to drill holes but it was pretty easy. My van is 99 E-350 fwiw.