Follow up on the remote pin-out, the remote is a standard rj45 plug
- Pin 1 = + 12 volts
- Pin 2 = LED Right Side Red
- Pin 3 = LED Left Side Green
- Pin 4 = LED Left Side Red
- Pin 5 = LED Left Side Yellow
- Pin 6 = LED Right Side Green
- Pin 7 = On/Off
- Pin 8 = LED Right Side Yellow
Connect a switch SPST between Pin 1 & Pin 7, the switch on the inverter mist be set auto/remote. The inverter will default to charge only and turn the inverter on when you switch Pin 1 & 7 together.
The other six outputs are the low side for the LED Display
-greg