Hum....Better cold weather protection for the water system. I see they are doing better with insulation. They should be able to make the flat plate less vulnerable to freezing without loosing the RIVA rating.
A nicer head liner that is made to accept gauges like the Nexus type I had installed.
Better “thru the hull” power ports. I’m not real happy how the wires are run through the top. There is a lot of boat stuff that looks like it would work better. I have been hung up in low branches and always worry about ripping the harness for the solar panels off.
Definitely add protection to critical areas that can rub holes in stuff. I spent 1 day adding rubber and zip ties all over the place.
I like the air dam system to help cooling the engine.
Add a switch to bypass the isolator/separator.
Find a way to keep out dust!
I would like an outside shower hook up rather than the current setup. It always leaks due to vibration. I wish I had a wand with a control on the shower head itself. Just stow it when not in use.
Braided brake lines.
Another set of brake lights in the aluminess bumper. I’m working on this. I zoned because I just had the bumper re-done and could have had them installed, but I think I can add a thin LED strip above or below the backup lights.
I don’t know if I like this thread…I’ll lay in bed thinking up all kinds of stuff….no sleep!
Dave