INTERIOR BUILD
Hi:
Just about ready to start my "temporary" interior which will be pretty rough for my first trip.
My plan is to bolt 2 pieces of oak, 6" X approx 9' horizontally along the drivers side wall and another matching piece (shorter) along the passenger side. This will give me something to screw my E-Track to which will support my simple platform bed. I have the necessary sets of brackets to hold the 2X4's that will run across the van width. Final bed size looks like approx 4'X6' + or -
Question is this: Should I place a piece/strip of Reflectix between the oak and the metal interior wall to prevent rubbing/squeaking and provide a little bit of cushioning?
This would seem to make sense to me.
Again the E-Track is just temporary for the 2 month trip. I intend to remove the E-Track at some point and add the walls and cabinets (RB-50 style layout) in the future.
Any suggestions would be greatly appreciasted.
jjtwister
__________________
2011 E-250 Home Build 2WD
Action Van 4" Lift
American Racing ATX Black Teflon Rims
Toyo AT 2's 285/R75-16's
1959 Chevy Apache Hot Rod
|