ScanGauge error with high MAP
For diesel SMB's with ScanGauge.
I discovered when my boost exceeds 36 PSI it reverts to Zero and continues to climb. And when that happens other parameters also change. For instance, MPG is dropping rapidly as boost approaches 36 PSI (when climbing a big hill) and when boost goes to 0.1 PSI, MPG jumps from 2.0 to 200+MPG.
I'm sure I'm not the only one that has had this happen. So, I'm passing on the 'solution' for all to use.
Contacted Linear-Logic and they said a register was filling up and when it spilled over it affected several other parameters. So, they gave me a different way to measure boost using X-Gauge functions:
- TXD - 07E0221440
- RXF - 046285140640
- RXD - 3010
- MTH - 012203200000
- Name - PSI
I haven't tested it yet, because I need a bigger hill than I have around home. Probably it will work as it always should have.
Mike
__________________
Alaska to Key West, Labrador and more
Prostate cancer survivor. See Thread Prostate cancer and Sportsmobiles
2015 VW GTI 2020 Fiat 124 Spider
2012 E250 Hitop camper
|