Rusty washers on SMB top - Page 2

Beagle · 10-24-2016, 04:10 PM

Sorry, posted before i attached photo.

LandVan · 10-24-2016, 04:45 PM

What diameter stainless steel washers did you use in your replacement?

1/4" x 2.5" or 1/4" x 3"?

Beagle · 10-25-2016, 11:10 AM

I used 1/4" X 2,5" washers from McMaster. They are not stainless, they did not have 2.5" diameter stainless. However the smaller washer is stainless. I used a 2 5/8" hole saw with a 1/4 pilot drill to fabricate the butyl washers. I failed to show the new black buttons that were purchased from SMB in Fresno and available online. Hope that helps.

LandVan · 10-25-2016, 05:07 PM

Quote:

Originally Posted by Beagle

I used 1/4" X 2,5" washers from McMaster. They are not stainless, they did not have 2.5" diameter stainless. However the smaller washer is stainless. I used a 2 5/8" hole saw with a 1/4 pilot drill to fabricate the butyl washers. I failed to show the new black buttons that were purchased from SMB in Fresno and available online. Hope that helps.

They seem to have the stainless washers now.

For Screw
Size ID OD Thick. Hardness Pkg. Qty. Pkg.

316 Stainless Steel
1/4" 0.281" 2.500" 0.051"-0.080" Not Rated 5 91525A235
1/4" 0.281" 3.000" 0.051"-0.080" Not Rated 1 91525A237

18-8 Stainless Steel
1/4" 0.281" 2.500" 0.051"-0.080" Not Rated 5 90313A307
1/4" 0.281" 3.000" 0.051"-0.080" Not Rated 5 90313A309

Black-Oxide 18-8 Stainless Steel
1/4" 0.266" 2.500" 0.050"-0.080" Not Rated 5 90377A162
1/4" 0.266" 3.000" 0.050"-0.080" Not Rated 5 90377A163