|
05-08-2015, 10:15 AM
|
#1
|
Member
Join Date: Sep 2011
Location: Boise, ID
Posts: 48
|
Tire Pressure and Air Compressor
Our SMB gets shaken to death on washboard roads. I understand lowering tire pressure would help, but how low is acceptable? We have a 2WD w/ LT245 tires. The door sticker says 60psi front and 80 psi rear.
The other issue is airing back up when returning to pavement. The 12v portable pump I have would take forever. Has anyone tried taking the pump off a pancake style air compressor? (with the air tank it would take too much space to store). We have 120v available to power it. Harbor Freight sells them for $40 w/ a coupon.
Any thoughts or experience would be appreciated.
thanks,
John
|
|
|
05-08-2015, 01:54 PM
|
#3
|
Senior Member
Join Date: Feb 2010
Location: Arcata, CA
Posts: 623
|
Re: Tire Pressure and Air Compressor
I'm not an expert, but if it was me I would start with 35 front 40 rear and see how that rides.
For airing up, we use a 10# CO2 bottle. It's good for 4 fill ups on our huge 315 tires.
__________________
2002 E350 7.3 PSD
Quigley 4x4, EB50 floorplan
|
|
|
05-10-2015, 10:04 AM
|
#4
|
Senior Member
Join Date: May 2011
Posts: 1,005
|
Re: Tire Pressure and Air Compressor
The reason you get shaken to death is that the suspension is designed for a 1 ton commercial van driving on pavement...
I never ever aired down my 2WD van with 245s, just drive a little slower.
__________________
Sportsmobile-less.
"A job worth doing is worth doing at least twice."
|
|
|
05-10-2015, 11:41 AM
|
#5
|
Senior Member
Join Date: Feb 2012
Posts: 879
|
Re: Tire Pressure and Air Compressor
Quote:
Originally Posted by ANZAC
The reason you get shaken to death is that the suspension is designed for a 1 ton commercial van driving on pavement...
I never ever aired down my 2WD van with 245s, just drive a little slower.
|
That's interesting. I used to have an E-250 2WD SMB, and I (still) found washboard roads to be pretty "jumpy" and unpleasant. Of course I slowed down, but even so. I didn't have 245's though, but rather the stock 225's. Would 245's make a big difference?
|
|
|
05-10-2015, 12:22 PM
|
#6
|
Site Team
Join Date: May 2007
Location: Turlock Ca
Posts: 10,409
|
Re: Tire Pressure and Air Compressor
I found the difference between 285's and 315's (using the same rim size) was huge. The 315's feel softer almost like the 285's aired down 15 pounds but the average normal running pressure with the 315's is rated lower as well. Running at full rated pressure (which I don't normally) I also had better cornering with the 285's but on wash board I'm more reluctant to air down now because the 315's handle it much better. If it's a long haul I'll either slow down or speed up and find that sweet spot. If aired down I keep my speeds down below 30MPH
__________________
2006 Ford 6.0PSD EB-50/E-PH SMB 4X4 Rock Crawler Trailer
Sportsmobile 4X4 Adventures.......... On and off road adventures
|
|
|
05-10-2015, 11:43 PM
|
#7
|
Senior Member
Join Date: May 2011
Posts: 1,005
|
Re: Tire Pressure and Air Compressor
Quote:
Originally Posted by Viva
Quote:
Originally Posted by ANZAC
The reason you get shaken to death is that the suspension is designed for a 1 ton commercial van driving on pavement...
I never ever aired down my 2WD van with 245s, just drive a little slower.
|
That's interesting. I used to have an E-250 2WD SMB, and I (still) found washboard roads to be pretty "jumpy" and unpleasant. Of course I slowed down, but even so. I didn't have 245's though, but rather the stock 225's. Would 245's make a big difference?
|
My E350 2WD had 245's stock. Dunno about E250s.
__________________
Sportsmobile-less.
"A job worth doing is worth doing at least twice."
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|