Sportsmobile Forum - bcaine's Album: dana50 conversion

Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×

		Sportsmobile Forum > bcaine's Profile > Albums
dana50 conversion

Click Here to Login

Registry

Page 1 of 2

1

dana50 conversion

view down drivers ECM

old mount bracket bolts

drivers side bracket half

bump clearance with block

clydesdale location problems

clydesdale bracket mockup out of cardboard

Clydesdale van 4wd conversion using d44 axle

spring mount to stop height.

bracket above passenger beam

bumpstop on passenger side is centered above axle.

spring mount to bumpstop distance... too close?

nut suspended down 14 1/2" from spring perch, the installed height of a cc880s spring

showing drivers view down beam... bumpstop not centered on beam

mid section of jig used to hold axle pivots while making pivot brackets.

triangulating position for axle under shocks.

D50 front to back dimensions

D50 side to side dimensions

Would love to have this measurement off an agile conversion...from flange on crossmember to rear of differential.

Notching crossmember

Mock up/support for passenger arm pivot location

View from passenger side along back of axle

pass beam side view

pass beam front view

steering box arm comp

driver beam side view

Page 1 of 2

1

Disclaimer:

This website is not affiliated with or endorsed by Sportsmobile SIP or any of its affiliates. This is an independent, unofficial site.

All times are GMT -6. The time now is 11:44 AM.