Fitz' 2016 4x4 RB 150S Build
Pictures and Etc. during the SMB Texas build process and afterwards (does the build ever stop?)
10   Access with seat in place
05   Sure Power Separator Name Plate
02   Sure Power Separator 01
01   General Arrangement
Antenna 2
Antenna 1
14 Gallon Auxiliary Tank  
Bolt Location   Rear
14 Gallon Auxiliary Tank  
Bolt Location   Forward
CTEK MUS 4.3
AC Power Connection
12 Volt Connection
Fuel Gauge and Timer Switch 
Switch is a timer so if one forgets it turns off.... 
Bump switch to energize circuit to read fuel level
Fill Nozzle 1 
Body attachments are rivenuts 
Easy to insert fuel nozzle. 
If hard to fill, then vent line is full of fuel.  Detach from nozzle and...
Attachment Bolt 
Two bolts come down through the tank from the floor above
Connection   Bottom
Connection   Top
Sending Unit 
Mounted on top of tank
Tank 2   Rear   Fill Nozzle Lower Right 
Note:  Tank fills from the bottom
Tank 3   Front 
Sitting on the bench at Agile's shop, 304 Stainless
PIAA 7 
New horn(s), reading taken 5' from center front of vehicle
PIAA 6 
Replacement horn(s)
PIAA 5 
Replacement horn(s)
PIAA 4 
Stock horn
PIAA 3 
Stock horn
PIAA 2 
Stock horn, reading taken 5' from center front of vehicle
 
Disclaimer:

This website is not affiliated with or endorsed by Sportsmobile SIP or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 09:54 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.