Conversation Between Fitz and Davidboco
Showing Profile Comments 1 to 1 of 1
-
Hi again Fitz,
file this under preventive maintenance:
I recently applied the poptop tape - where the poptop rubs against the body - good thing too because I saw where there was just a little bit of bare metal exposed at one corner. With all the off road use you do you might consider this:
Check out sportsmobile store and search for poptop protective tape
much easier job than the lower molding clip job. Just make sure to rub/clean the area where the tape goes with alcohol - (not the jack type;-))
best, David