Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


 
Fitz's 2016 4x4 RB 150S Build - July 2016 to June 2020
Pictures and Etc. during the SMB Texas build process and afterwards (does the build ever stop?)
Flint Manual Cover 
Daughter Mandy removing the rear load bar to provide the needed clearance.
MB Jack Storage 
Passenger's Side Footwell
Modified HighLift Base 02 
Pushed to one side in order to provide 3 sides of contact
Modified HighLift Base 01
Extended Fully 02   28.5 inches from Rocker to Ground 
265/70/17 BFG KO2's, 4-1/4" Clearance from the Ground
Contact Point Under Rocker in HighLift Jacking Point 02 
Van Compass Rocker Guards Providing the Jacking Point
Final Installation
Slide with Spacer Beneath
Original Slide - Layout
07 Final
06 Close Connected
05 Close Disconnected
04 Dremel Upper Hole
03 Breaker Bar
02 Stock Sway Bar Near
01 Stock Sway Bar Far
Laura and John Brindle from Agile 
Taken in Agile's parking lot after the fuel tank skid plate install
SparerBumper #2 03
SpareBumper #1 Bumped 04
SpareBumper #1 Bumped 03
Modified Vent 5   Hose Attached 3
Modified Vent 3   Hose Attached 1
Modified Vent 2   Realigned
Modified Vent 1   Stock
Drver's Seat Base   Labeled   Fuel Gauge Selector Switch 
Up position - Gauge on door (this) side 
Down position - Gauge on opposite side of seat...
 
Disclaimer:

This website is not affiliated with or endorsed by Sportsmobile SIP or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 03:34 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.