Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


 
Modifications
Photos of the modifications and additions made to the rig.
Cabinet boxes 1
Kitchen cabinet base bolted to floor using factory seat mounting holes.
Paint spots over factory mounting holes.
Indexing plywood to insulation #3
Indexing plywood to insulation #2
Indexing plywood to insulation #1
Plywood for kitchen cabinet.
Seat mounting plates
Factory eat mounting bolt locations on a 2002 E350 Extended body van. Accurate to 1/8 inch. YMMV.
Starting point for bolt hole measurements is the rear door threshold.
Water damage in front of sink
Water damage in front of sink
Water damage by rear AC/heat unit
Bottom pulls and belt shroud
Driver side tire to front bumper clearance is a bit more than 1/2"
Passenger corner at door hinge tire to body clearance is a bit more than 1/2"
New tires
New BFG KO2 265/75 R16 tires
Old and new vents
Vent installed
The AC unit opening
Removing AC unit
iPad in place
Holder installation
iPad stop
 
Disclaimer:

This website is not affiliated with or endorsed by Sportsmobile SIP or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 05:34 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.