TheLetterJ, thanks for the info. I'll make a note to be on the lookout for double eccentric cams and no more than 2 1/2 lift. On the Shock's I'd like to stick around 100 per shock if possible. i guess if they are rebuild-able that would be worth paying more for.
Here is what I collected today.
My springs are F2UZ-5310M or the part number 9C2Z-5310-M which
is the same as
Brand:MOOG
Part Number(s):CC878
ProductName:Variable Rate Coil Springs, Front
Inside Diameter:3.983
End Type 1:Pigtail
End Type 2:Pigtail
Bar Diameter:0.781
Install Height:13.00
Load in Pounds:1687.0
Spring Rate:589.0
Free Height:15.75
I found this on moog's site
CC876 3.983 0.781 589 1510 13
15.56 PT PT
CC878 3.983 0.781 589 1687 13
15.75 PT PT
CC880 3.983 0.781 589 1850 13
16 PT PT
would I get any lift with CC880's they appear to be the same install height? or would using spacers be better?
or would this be a better idea
http://maxx-lift.com/products/E250-E...IT-2-INCH.html