|
|
12-30-2009, 11:36 PM
|
#1
|
Senior Member
Join Date: Dec 2009
Posts: 582
|
Roll Cage
I saw this topic was briefly covered in the general/tech section. However, since a cage and armor went on my Jeep before lift and tires for family safety, I'm strongly considering the same for the SMB.
So, I get the impression that if I go forward with it, I'll be the first. The shop I plan on using is Extreme Off-Road in Clovis, CA (next to Fresno). They are set up for this kind of work and have extensive experience building custom cages.
I spoke with Dave (owner) today. Based on the fact that I'm basically going with the Transformer theme (no full-blown RV interior), he recommended I have SMB do the interior first, then have him do the cage.
If I follow through (promised my wife I would), I'll follow up with a full-blown report and pics. In the mean time, if anyone else has pursued an interior roll cage I would love to learn from your experience.
__________________
Current: 2014 15 Passenger V8
Former: 2009 SMB 4x4 6.0
|
|
|
12-31-2009, 08:57 AM
|
#2
|
Site Team
Join Date: May 2007
Location: Southern New Mexico
Posts: 10,179
|
Re: Roll Cage
Interesting idea. You may want a minimalist cage just for weight considerations, of course depending upon your planned usage of the vehicle.
If you are an anal retentive planner, if you have lots of time, and if you have a willing fabricator, you could set up the cage to be the support structure for and interior units (galley, bed platform...). That would require a bit of back and forth of the vehicle to and from SMBw however.
And you better take a lot of pics (before and after).
Herb
__________________
SMB-less as of 02/04/2012. Our savings account is richer, but our adventures are poorer.
|
|
|
12-31-2009, 10:11 AM
|
#3
|
Senior Member
Join Date: Dec 2009
Posts: 582
|
Re: Roll Cage
I'm thinking that weight won't be as much of an issue for me (as has been described on other threads) since I'm not going the full-blown RV route (no galley, cabinets, extra batteries, etc., etc.). I had previously thought about a removable bed frame to be supported by the cage behind the 2nd row of bench seats. That was one of the 1st things Dave mentioned doing when we spoke.
That may lead me to just have SMB do a blank interior (Dynamat, windows, walls, flooring, and electrical). Then, have Extreme Off-Road install the seats and cage (SMB has been hesitant about using someone else's aftermarket seats).
We'll see. Gotta get the van here first.
As others have mentioned, once the decision is made to move forward, the wait is tough...
__________________
Current: 2014 15 Passenger V8
Former: 2009 SMB 4x4 6.0
|
|
|
01-09-2010, 06:43 AM
|
#4
|
Site Team
Join Date: May 2007
Location: Turlock Ca
Posts: 10,409
|
Re: Roll Cage
Somewhere ther is a thread about what a SMB with a PH roof can take in a roll over. I was stunnded what it took for damaged and came to the conclusion you might not need to add the extra weight. Sorry don't know where or the validity of the thread. Might have been on the owners group.
__________________
2006 Ford 6.0PSD EB-50/E-PH SMB 4X4 Rock Crawler Trailer
Sportsmobile 4X4 Adventures.......... On and off road adventures
|
|
|
01-09-2010, 09:45 AM
|
#5
|
Senior Member
Join Date: Mar 2009
Posts: 351
|
Re: Roll Cage
This is a great project. Please share your progress.
I have been worried about the same issues for several primary reasons. 1. These are heavy vans, many near their GVWR (or a little over). 2. Many are lifted. 3. The crash pics I have seen of SMBs in rollovers (I've only seen 4-5 total though) have all shown crushed roof support columns (I don't know if lighter vans have this problems also....I suspect they do).
Good luck.
Tom
__________________
Tom
Austin, Texas
1995 SMB E250
|
|
|
01-09-2010, 09:29 PM
|
#6
|
Senior Member
Join Date: Aug 2007
Location: Long Beach, Ca
Posts: 985
|
Re: Roll Cage
Quote:
Originally Posted by daveb
Somewhere ther is a thread about what a SMB with a PH roof can take in a roll over. I was stunnded what it took for damaged and came to the conclusion you might not need to add the extra weight. Sorry don't know where or the validity of the thread. Might have been on the owners group.
|
Here is the link.
Ray
http://www.surfline.com/surf-news/ne...-mexico_10471/
__________________
???
"I do, cellularSTEVE" :o)
|
|
|
01-10-2010, 06:19 AM
|
#7
|
Senior Member
Join Date: Jun 2007
Location: Helena, Montana
Posts: 613
|
Re: Roll Cage
I'm not sure that that incident in the Surfline report is a good or typical example of SMB rollover damage. The report states that there were 14 surf boards strapped to the roof plus a car top carrier of some sort. That much extra weight up high must have contributed to the roll over (caused primarily by the fishtailing trailer) and probably caused peculiar crushing damage as well.
Not that I want to find out what "typical" roll over damage might be mind you, but that over loaded rig was a disaster waiting to happen.
__________________
2006 Baja Tan SMB 4X4 EB50 PH 6LPSD
Mohawk Royalex Solo 14 foot canoe (light white-water)
Mad River Kevlar Explorer 17 foot canoe (flat water)
Dagger Royalex Legend 16 foot canoe (white-water)
Maravia New Wave 13.5 foot raft (fishing and white-water)
|
|
|
01-10-2010, 07:00 AM
|
#8
|
Senior Member
Join Date: Mar 2009
Posts: 351
|
Re: Roll Cage
Agreed. That was one badly loaded van. I wonder what regular vans to when they roll over. I spoke with an EMT/rescue paramedic who said the roofs often collapse. The SMB modifications don't involve strengthening the support columns at all (as far as I know), so a roof collapse will be more likely with more weight (Star Cool, Furnace, water tanks, propane, lots of cabinetry, OSB floor covering) all bolted to floor.
__________________
Tom
Austin, Texas
1995 SMB E250
|
|
|
01-10-2010, 02:00 PM
|
#9
|
Senior Member
Join Date: Jan 2009
Location: Corvallis, OR
Posts: 5,300
|
Re: Roll Cage
pictures of van rollovers look bad, but nearly all fatalities and serious injuries are due to ejection, not from the roof collapsing (so... wear those seatbelts...)
PS - the stock roof is designed to support 1.5x GVWR.
__________________
2000 E450 dually V10 wagon
|
|
|
01-10-2010, 07:49 PM
|
#10
|
Senior Member
Join Date: Mar 2009
Posts: 351
|
Re: Roll Cage
PS - the stock roof is designed to support 1.5x GVWR.
Which GVWR? The GVWR is sometimes upgraded due to the addition of upgraded suspension components and brakes. I'd appreciate a citation on that info.
Tom
__________________
Tom
Austin, Texas
1995 SMB E250
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|