I would like to check the torque on the bolts around the oil pan. 2009 E-350 with 6.0 engine. Does anyone know right off hand?

Thanks,
Woody

__________________
2009 White E-350 Modified EB-43, 4x4, 6.0 PSD

Woody

I couldn't find specific torque values for the pan bolts, check this link, there are some standard torque recommendations based on bolt size.



http://www.powerstrokediesel.com/docs/EF_456.pdf

__________________
2006 E350 6.0PSD 5R110, SMB 4X4, RB-50, ARB lockers front/rear, Aluminess galore, AMP steps.
Callsign KK6GIY

Thanks Ron, I think I can figure it out with the chart.

Woody

__________________
2009 White E-350 Modified EB-43, 4x4, 6.0 PSD

I just did this. 14 ft lbs sounds right. It's not nearly as much as you would think.

I would agree with this---I've heard or read somewhere 15 ft/lbs. Much more and you could warp the pan etc.