Re: Hella light install
Quote:
Originally Posted by Tracker926
86 the yellow wire. Goes from the relay to the switch, and from the switch to ? To eliminate the switch and trigger off the high beam would I just tie into the wires for high beam. I am a true novice and am grateful for advice/help.
|
Yes, if you don't want a switch in the van connect relay post 86 to one of the high beam positive wires. Each headlight has 3 wires, low +, high + and ground. I used a multi meter to find the high +.
__________________
2006 E350 6.0PSD 5R110, SMB 4X4, RB-50, ARB lockers front/rear, Aluminess galore, AMP steps.
Callsign KK6GIY
|