Quote:
Originally Posted by Roonie
Quote:
Originally Posted by saline
Found my problem today. I took apart the hub and found the inboard snap ring had failed. This allowed slop in the hub which I suppose led to the hub jiggling enough to loosen all the retainiing allen screws.
|
Did you end up doing the work yourself? I know Badgertrek has a great tutorial on the hub redo. I am thinking of undertaking it myself but am intimidated by the process and proper tightening / order of parts.
|
I had been a bit leary of taking it apart but it's very simple. Not too much going on in there. You just need an allen wrench, phillips screwdriver, and a flatehead for the spring/snaprings.