Transfer case broke

bigriver · 07-14-2020, 12:32 PM

I need some input from anyone who knows a good shop in Twin Falls I'd. Who could deal with a broken transfer case. I can limp it that far.

arctictraveller · 07-14-2020, 12:46 PM

What happened?

bigriver · 07-14-2020, 02:01 PM

Sounds to me like a bearing. Intermittent noise became constant. When I put it in 4 hi works fine. Anyone know what transfer case I have? 2003 quigly

**daveb** · 07-14-2020, 02:08 PM

I'd also check the rear u joint. I had a vibration from a bad rear u joint. If I put my front in with the rear out the vibration went away.

**daveb** · 07-14-2020, 02:10 PM

Quote:

Originally Posted by bigriver

Sounds to me like a bearing. Intermittent noise became constant. When I put it in 4 hi works fine. Anyone know what transfer case I have? 2003 quigly

Well forget about my post if you have a quigley.

bigriver · 07-14-2020, 04:41 PM

Found a place in Twin Falls. They're having a hard time getting tf #s to reference a part. I'd buy a new one and swap out if I can figure out what to buy. I'll try quigly tomorrow. Any help appreciated

simplesez · 07-14-2020, 05:03 PM

With VIN Quigley can tell you every part that got used to convert to 4*4. They are usually very very helpful.

Lilnuts2 · 07-14-2020, 11:01 PM

These guys in Montana, might be of some help. Very knowledgeable.
https://torqueking.com/

SteelheadJones · 07-15-2020, 12:43 AM

Quote:

Originally Posted by bigriver

Anyone know what transfer case I have? 2003 quigly

If it's a single floor shift lever with manual locking hubs, chances are it's an NP271.

If there's a dial on your dash with auto locking hubs, NP273.

If there are multiple sticks on the floor, Atlas.

It might possibly be a Borg Warner 1356, but I think that was more an Agile t-case.

shenrie · 07-15-2020, 05:15 AM

Dang, sorry, just saw this thread

Definitely reach out to Sabrina at quigley. If you need her contact, just lmk. They will send you a complete parts list of everything involved with your build. Something you should have regardless.

I have a good friend that’s sponsored by a great off-road shop there in twin. I’d be surprised if they couldn’t source you a case. Between them and myself here in boise we should be able to find what you need. Feel free to pm me your number and I’ll give you a call. I’ll help out however I can.