What do I need to know to do my brakes?
Aside from all the threads I've read regarding rotor selection, wheel stud selection, drilling out holes for the studs, etc., what do I need to know to do the front brakes (rotors and pads) on the front of an 2005 SMB 4x4 with ProRock 60? I've never done the front bakes myself, but prefer to do as much work as I can myself.
I assume I pull the hub off as if I'm servicing the bearings (thanks for the great write up Badger!). How does the rotor separate from the hub? I'm guessing it will be obvious once I get to that point, but I prefer to learn from others experience when possible.
Thanks,
Phil
__________________
Phil
- 2005 EB50 6.0PSD - SMB 4x4
|