E-Series Grab Bag: Sienna front seat mount, XLT front seats, Swivels

[scuba]

I've got the much-talked-about, not to be produced-again, MG Metalworks Driver seat mount for Sienna seats to fit in the E-Series factory bolts. (bought a pair from an expedition portal member and just installed passenger). I paid him what he paid, which was $490 each (I *really* wanted the passenger) Make me an offer if you could use it.

I also have a matched set of stock tan cloth XLT trim passenger seat and (power) driver's seat. These are take-outs from my new (to me) 2013 E350 with 46k miles. Both need receiver-side seat belts (I had to re-use).

Finally, I bought too many swivels. I've got one passenger swivel from DiscountVanTruck, and one passenger swivel from 1Der (Ray). Asking for cost. Will ship next day.

Will post pictures if there is interest.
Items located in Dallas, TX.
email t-e-x-n-y-c without dashes at gmail.

[scuba]

For folks asking me to estimate shipping, I'm not a pro with doing that quickly / easily. I'm happy to do it, but you may be better at that, and in any event, I'd just ask for actual shipping.

The 1der swivel is 18.5" x 18" x 11" and weighs 23 pounds, from origin 75032.
The other one is similar dimension-wise, but closer to 30 pounds.

[scuba]

Update, the seats and the 1der swivel are sold. The discountvantruck swivel and the Sienna river mount remain.

[Send It]

How much for the other swivel ? Its for passenger side correct?

[scuba]

Yes, passenger swivel. It's Stock # 113633 on this page:

https://www.discountvantruck.com/rvv...dseatbases.htm

I'm within the return window of having bought it, so I would get my $289 back, but I'd prob have to pay return shipping.

I'll take $200-- you just pay the actual shipping.

PS it's still in the box.

[Send It]

Ok sounds good, let me know how you'd like to do this

[scuba]

PM me your phone # or email and we can work out the logistics.

[scuba]

Everything is sold except the driver Sienna Mount. Thanks everyone.

And please let me know who thinks they might install a Sienna driver in the future. Need this thing gone. Accepting all offers.

[scuba]

Here's a pic of the Sienna driver's-side mount.

[scuba]

I measured the height from the floor to the bolt holes, and it's ~6.5inch in the back and 5.5in in the front. Let me know if someone could use this-- it's a unique item, but it's very close to being pitched from the garage.