Ford Econoline rear window trim with built-in shades

ndubes · 01-31-2019, 03:10 PM

I bought these from Eric D with the pop-out windows and ended up not using the trim and shades since I went a different direction with the window coverings, so they're available for sale. $100 + the ride, located in Phoenix AZ.

They're really light, but the boxes are kinda big so if someone wants them I can get a shipping quote with their zip code.

The frames are in good condition, color tan. Blinds are installed on both frames as you see in the pictures.

BenJJ · 01-31-2019, 05:41 PM

If these were gray I would be all over this

BrianW · 01-31-2019, 06:27 PM

Quote:

Originally Posted by BenJJ

If these were gray I would be all over this

Spray paint for plastic materials works fine on this plastic. I repainted my doghouse from gray to blue and it’s held up well.

shadetreevanman · 01-31-2019, 09:31 PM

If shipping to 92880 Corona, California isn't too crazy, I'll take them. I too need grey but figure I can paint them.

ndubes · 01-31-2019, 10:18 PM

I’ll see about getting a shipping quote in the morning and send you a PM

shadetreevanman · 02-01-2019, 09:22 AM

That would be cool. We have a trip planned for Sedona in April and will be passing through Phoenix to get there. Too bad it's not sooner.

ndubes · 02-01-2019, 10:04 AM

Quote:

Originally Posted by shadetreevanman

That would be cool. We have a trip planned for Sedona in April and will be passing through Phoenix to get there. Too bad it's not sooner.

Sent you a PM

shadetreevanman · 02-01-2019, 11:15 AM

Excellent. I'll be arranging payment. A buddy of mine has several trim pieces from other color interiors in his van. He found some plastic paint that appears to be a very close match. Looking forward to getting these in. My current surrounds just have open holes around the pop out latch assemblies.

Thanks for making these available.

ndubes · 02-01-2019, 11:26 AM

Sold! enjoy Tim!

dickie · 02-02-2019, 09:55 AM

I have the same shades all the way around my Quigley window van. Whoever bought them should know there’s a small plastic disc shaped device the guide string for the shades attaches to. Loosen up this disc and tension the string pretty tight then re tighten the center screw, I do mine until you can pluck a pretty low sound out of them. If you don’t tension them, the shades will drop down a little on every bump you hit in the road. It took me a little time and frustration to figure it out, but now I’m really happy with them.