SOLD: Aluminess Deluxe Box, Shelf, Swingarm & Expedition Kit

[rltilley]

I just had Aluminess install a Bike Rack swingarm on my van so I no longer need this. The Deluxe box has a shelf installed at a height that should allow a generator to fit below it. The expedition kit is included. The shovel & axe were stored in the garage when not travelling but the black shield on the axe is peeling off anyways.

The box has Thule tracks built onto the top. Aluminess didn't like the way SMB installed the box reinforcement so they fixed it on one trip I made to their shop. It is pretty solid and works well. I do have some of the Thule hardware to fit on the tracks but I had a failure recently that bent the parts of the mounts that fit into the trays. Those would need to be replaced.

The swingarm is for the E series rear bumper. Measuring the inside distance between the swingarm hinges is very close to 24" so your setup would need to work with that. Pretty much no hardware is included so all of that would need to be sourced.

Pictures can be found at the link below. I'm thinking $800 for all but I can also sell the box separately if needed. I'm located in San Diego and can likely meet as far North as Lake Forest if needed since there is a good cheesesteak shop up there.

https://roberttilley.smugmug.com/Aluminess/

[Grampswrx]

This is the perfect addition to a stock rear bumper if you already have a swing arm spare carrier. Good price too!

[cardifftodd]

Hi-

Sent a PM. Is there a way to mount the box to stock bumper?

Local here in San Diego.

Thanks.

-TL

[rltilley]

Originally Posted by cardifftodd

Hi-

Sent a PM. Is there a way to mount the box to stock bumper?

Local here in San Diego.

Thanks.

-TL

None that I am aware of. This really requires an Aluminess bumper to mount to.

[Lokoh]

Interested in the expedition kit if you’re willing to separate. I’m in SoCal too

[rltilley]

Originally Posted by Lokoh

Interested in the expedition kit if you’re willing to separate. I’m in SoCal too

Since the kit is bolted to the box I'd rather keep them together. Otherwise there would be holes to plug in the side of the box.

[rltilley]

Bump. This is still available here in warm SoCal.

[doublevan2]

Curious as to whether you would part with and ship the swing arm by itself ? Price ? Calculate shipping via UPS Ground ? - wrapped in bubble and/or also some card board ? I have a Road Armor rear bumper - and would most likely weld swing rm to my existing swing arm. I could pay in advance and some extra for the packaging - if any of this is an option for you ?

[BrianBlair]

I'd be interested in the box/expedition kit if another person wants the swingarm....

[rltilley]

Originally Posted by BrianBlair

I'd be interested in the box/expedition kit if another person wants the swingarm....

Sorry for the delay. Typically I get a notice when replies are posted but I didn’t get one this time. The box is separate from the swingarm so I can sell that individually. I’m down in San Diego but would be able to drive A bit to meet up if you are interested.