SOLD: Fynspray manual pump for Scepter container

[dhally]

We are upgrading to an electric pump, so our trusty hand pump is up for grabs. It is already mounted in a Scepter lid.

They go for over $100 new, but it looks like there's some cheap competition as well, so how about $30 shipped?

(Note: this was used in a 2.5 gallon Scepter water container. For a 5 gallon container a longer suction tube will be required. It accepts standard vinyl/Tygon tubing.

[BroncoHauler]

Where were you about 4 months ago when I bought a new Fynspray?





Herb

[Steve C]

I've never seen those before and it's cool! Just ran down to the basement to see if it would fit mine, as it turns out my jerrys are LCI and not Scepter. Any idea if the lids might be compatible?

[BroncoHauler]

Originally Posted by Steve C

I've never seen those before and it's cool! Just ran down to the basement to see if it would fit mine, as it turns out my jerrys are LCI and not Scepter. Any idea if the lids might be compatible?

See my post below on how to use this with a Scepter, but I don't see any reason it wouldn't work with an LCI Scepter-style MWC.


Herb

Originally Posted by BroncoHauler

Not original on my part, but I got a little tired of filling my Scepter MWC from my water tank, and then tipping the MWC to dispense water. I tried a spout with a valve, but that tended to drip. This pump does not pressurize the can, it essentially pulls up the water with each stroke.

The details and parts used are in the instructions on the link below.



Scepter Water Can Hand Pump Conversion | Danger Ranger Bear


Herb

[Steve C]

dhally, I'll take it and hope that it fits. DM will be sent momentarily for contact information.

Herb, thanks for the link - looks like a beneficial addition for sure.

[dhally]

Yes, everything I read states that LCI and Scepter use the same threads.

I also found a length of suction tubing in my plumbing box which will make it work with the taller 5 gallon size.

[dhally]

Sold! Wow that went fast.