My Experience: Weldtec Design Grocery Getter

[E-350]

Thanks for adding this, appreciate it!
Let's keep fingers crossed that communication gets to the same level than their quality and everyone is all set!

I still have to figure out my rear leaf situation. Due to the communication I eventually skipped the leafs directly from Weldtec and still have to find a suitable replacement.

In the meantime I have also installed the ARB Locker and the Twin Compressor (also incredible lead times some months back...) and swapped from 3.73 gearing to 4.56 to accommodate my 35's. Really nice set up now, beside the leafs :-)

[E-350]

Hey guys

Just a quick update on 2 topics here.

1. Wheel wells
Going for 35‘s I was hitting my rear wheel wells. First in the front, then moved the axle slightly and now rear.
Just got a quote today for 750$ to increase both rear wheel wells by ~1“ in both directions (front/ rear).

2. Steering Stabilizer
I had a pull to the left for quite some time now.
Eventually took off the stabilizer and it was gone! Just going straight.
Looks like it‘s strong enough to cause this pull.