I've been roaming around my engine bay the last couple weeks just giving everything a once over and some TLC. I've seen this grey "thing" before and never gave it much attention. It's located on the driver's side near the coolant bottle and above the brake fluid reservoir. Anyone here know what is supposed to be hooked into it? Looks like it would terminate a hose or something. I don't see anything in the vicinity that looks like it belongs in it.
I've been roaming around my engine bay the last couple weeks just giving everything a once over and some TLC. I've seen this grey "thing" before and never gave it much attention. It's located on the driver's side near the coolant bottle and above the brake fluid reservoir. Anyone here know what is supposed to be hooked into it? Looks like it would terminate a hose or something. I don't see anything in the vicinity that looks like it belongs in it.
Thanks in advance!
That is a Duma-flaji-thingamajig. The confusionater hooks to it. If it works DO NOT fix it
Greetings pjpvi, on my van which is also a 2005 that is where the factory Ford upfitter plug comes out of the chassis harness. The "plug" in your photo looks like the pig tail that is plugged into mine. Have you opened up the plastic raceway with the chassis loom in it to see if there is a mating plug for the one in your picture, or maybe 4 terminated wires that had a plug on it?
Here is what mine looks like.
- Eric
__________________
2005 SMB RB 4x4 6.0 PSD
A rocket on the pad is safe,
but it's not what rockets are built for.
Upon looking closer at your photos I believe I can see the four up fitter wires under the loom. I'm going to guess that what your looking at is a "dummy" plug from ford to hold the upfitter plug if it was not used. Mine was probably like yours until SMB removed it, inserted a new plug with pig tails and utilized it for, stuff.
- Eric
__________________
2005 SMB RB 4x4 6.0 PSD
A rocket on the pad is safe,
but it's not what rockets are built for.
Upon looking closer at your photos I believe I can see the four up fitter wires under the loom. I'm going to guess that what your looking at is a "dummy" plug from ford to hold the upfitter plug if it was not used. Mine was probably like yours until SMB removed it, inserted a new plug with pig tails and utilized it for, stuff.
- Eric
Thanks Eric! I'll look and see if the wires are sitting in the plastic raceway. If so, may have been a cleaner way to get connectivity from the dash to engine bay over the years.