Hub and Spline - parts numbers needed

[jdaiberl]

Hello - I have a 2006 SMB with the Dynatrac front axle. I need a new passenger side hub and spline but nobody here in Cape Coral knows what exactly is needed. Can someone share the exact part numbers for these parts or know where I can find them?
Thanks!

[Twoxentrix]

When you acquired the Van did you also receive the Sportsmobile Binders? Lot of ‘needed’ info in those - part numbers etc. Even the alignment spec’s are a must have.
I can send you some pics of mine later today (have a 2006 diesel), but I also thought someone had posted a ‘sticky’ under one of the Forum sections with a link to Manuals. Might just browse through each one briefly to see if you can locate it - usually listed within the first 10 threads.

[jdaiberl]

In have the manuals and the part numbers for the seals and all this, but our does not list the part numbers for the hub and the spline on mine. Diesel here as well.

[Twoxentrix]

Here is what I have - someone else may stumble along and offer additional info, but in the event that doesn't take place I suggest contacting Field Van to see if they can provide the specifics for you (they have been very accommodating & useful when I need help). Please do post back what you end out using for both so others (and myself) can benefit.
This is the thread I snagged one of the Pic's from a while back:
https://www.sportsmobileforum.com/fo...xle-32610.html

This is the sheet I've been using (The GM ABS Sensor fixed one of my issues a while back when the Shop couldn't figure out why the ford part they installed didn't work):

[jdaiberl]

Thanks for sharing, this is the same document I also have for my SMB, unfortunately it does not have any part numbers for the hub itself on it. I have heard that it is from a 1987 or so Ford F350 but again not completely sure about that and which version. Might try to give Field Van a call, they seem to know these rigs a bit and maybe able to help.