First time poster, hope this is the right forum.
I am hoping some one could help me determine if I have any chance to setup at least my front passenger seat on a swivel and it will actually swivel
I have 2005 E150 cargo van that was converted and sold by LA West company.
The seats it came with are either re-upholstered Ford seats or aftermarket seats by Atwood according to a sticked under pass seat.
Both passenger and driver seats are bolted to what appears to me a Ford OEM seat bases, I checked bolt pattern on the base and both, lower and upper look stock to me.
Driver seat is electric, passenger is all manual.
So I assume I can purchase a swivel seat base made for Ford OEM, remove my fixed base and bolt my Atwood seat to swivel.
The main question is whether I will be able to rotate this seat full 180 degree.
Atwood seat appears to be somewhat bigger than Ford OEM seat (extra bolsters on seat and back), but I dont have anything to compare it with
If someone could please confirm their seat dimensions I would be grateful
So I could hurry up and jump on group buy thread for swivel here
group buy thread for swivel base
My Atwood seat cushion is 20" wide, which creates very little clearance with dog house IMO when I put seat in its most forward position just before I suppose to turn it CCW. Does this mean I won't be able to swivel it? I can squish the seat bolster a little at the corner to gain more clearance.
I can remove the panel with switch on the left side if needed.
The seat back is about 19" wide + 2" armrest.
All pictures taken with the seat in its forward position ready to clear the B-pillar before turning it CCW.
Thank you!