RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×
 


Reply
 
Thread Tools Display Modes
 
Old 08-21-2020, 09:47 AM   #401
Junior Member
 
Join Date: Aug 2020
Posts: 1
Exclamation Passenger Side Swivel

Hi Ray!
I definitely want a passenger swivel base for our 2014 Ford E350 Van!
Iím sorry to be late to the party but just discovered this thread while searching for your Talon Door Catch - would like one of those too
Please let me know if you can still accept my payment for this go round or if I need to wait for the next group purchase.
Thank you for coordinating this for all of us!
__________________

dscott2623 is offline   Reply With Quote
Old 08-26-2020, 11:52 PM   #402
Senior Member
 
1der's Avatar
 
Join Date: Apr 2013
Location: San Francisco, CA
Posts: 2,394
Three Passenger seats left ready for shipping.

Looking at starting another group buy if enough interest. Target ship date is mid October. Pls let me know! Thxs!
__________________

__________________
Ray
Beastie 3: 2002 7.3 EB Cargo: Agile TTB, CCV Mid Top, Custom Walk Through, Lots of stuff added. BlingMyRig.com
1der is offline   Reply With Quote
Old 08-27-2020, 06:45 AM   #403
Member
 
Join Date: Sep 2017
Location: VT
Posts: 50
Garage
Just installed drivers yesterday a bit tight for armrest with scheel mann but once you figure out how it turns no problem
Attached Thumbnails
20200826_122423.jpg  
snowgroomer is offline   Reply With Quote
Old 08-28-2020, 08:04 PM   #404
Junior Member
 
Join Date: Mar 2011
Posts: 5
Swivel seats left?

Quote:
Originally Posted by 1der View Post
Three Passenger seats left ready for shipping.

Looking at starting another group buy if enough interest. Target ship date is mid October. Pls let me know! Thxs!
Am I understanding this as you have three still available and unclaimed. If so I'm interested.
mikewmay is offline   Reply With Quote
Old 08-29-2020, 08:37 AM   #405
Senior Member
 
1der's Avatar
 
Join Date: Apr 2013
Location: San Francisco, CA
Posts: 2,394
Wiring: ( see post#151 this thread for more details and pics)

The wire is routed through the carpet/mat at the back edge of the swivel base floor plate.

"The sensor wires should be protected with split loom or something similar to prevent chaffing.

On the passenger side, the wire is run inboard of the swivel drum. On the driver side comes up through the whole in the lower section.

Disassemble the connector on the wires coming from the seat. (Others have cut the wires and re-spliced, just be careful and make sure the ignition is off and key removed). This is needed to feed the wires through the small hole in the upper plate of the swivel seat base. Mark the wires before disassembly so they can be put back in their correct positions.

Now you are ready to mount the seat to the swivel base upper section. The studs from the seat base tracks should line up with these holes. IF THEY DO NOT LINE UP Ė this means the tracks have moved independently from each other. Realign the tracks by pulling up on the seat slide adjustment bar and move the tracks so they are in proper alignment. Once the studs drop through the holes, secure the seat to the upper section of the swivel base with the original nuts.

Now we can finish the wiring - Pass the two wires through the hole in the upper plate and reassemble the wires into the connector housing."

Call/text me and I can help if needed.
__________________
Ray
Beastie 3: 2002 7.3 EB Cargo: Agile TTB, CCV Mid Top, Custom Walk Through, Lots of stuff added. BlingMyRig.com
1der is offline   Reply With Quote
Old 08-29-2020, 11:32 AM   #406
Junior Member
 
Join Date: Aug 2020
Location: Venice, CA and Tucson, AZ
Posts: 1
I'd like to have a passenger side swivel.
Kendel is offline   Reply With Quote
Old 08-29-2020, 02:32 PM   #407
Senior Member
 
1der's Avatar
 
Join Date: Apr 2013
Location: San Francisco, CA
Posts: 2,394
Quote:
Originally Posted by Kendel View Post
I'd like to have a passenger side swivel.
Kendel - Welcome to the forum!

What zip are you looking at for shipment? I have one seat base left and waiting to here from the guy in front of you. If he does not respond or passes, it is your's.

I will get the info to you re; payment, etc. so you are already to go.

Cheers, Ray
__________________
Ray
Beastie 3: 2002 7.3 EB Cargo: Agile TTB, CCV Mid Top, Custom Walk Through, Lots of stuff added. BlingMyRig.com
1der is offline   Reply With Quote
Old 08-29-2020, 11:52 PM   #408
Senior Member
 
1der's Avatar
 
Join Date: Apr 2013
Location: San Francisco, CA
Posts: 2,394
All done with this group buy, thank you to all who participated!!
Great news is multiple Scheel Mann seat installations were done, driver and passengers. These were mounted on the swivel seat bases using the adapters from SM made by ExpoVans.

Now we are onto mid October if enough interest. I have some interest already, so please get me zip codes and what you want. Thxs! Ray
__________________
Ray
Beastie 3: 2002 7.3 EB Cargo: Agile TTB, CCV Mid Top, Custom Walk Through, Lots of stuff added. BlingMyRig.com
1der is offline   Reply With Quote
Old 08-30-2020, 07:57 PM   #409
Senior Member
 
vandiesel's Avatar
 
Join Date: Oct 2009
Location: Portland, OR
Posts: 805
Garage
Thanks Ray
Click image for larger version

Name:	IMG_3932.jpg
Views:	11
Size:	148.9 KB
ID:	35425
__________________
2001 Ford RB 7.3 Quadvan (sold)
2006 Sportsmobile EB Transformer 6.0
vandiesel is offline   Reply With Quote
Old 08-31-2020, 03:40 PM   #410
Junior Member
 
Join Date: Aug 2020
Posts: 2
I'm interested in a driver and passenger zip 93311
__________________

TerryG is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Sportsmobile SIP or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 01:44 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
×