Swivel Seat Base (FORD E-Series) Group Buy #3

[TomsBeast]

confirmed, passenger side.

I know it isn't a direct replacement, wrong hole locations for my '95, the final fitment is on me.

A note to others with earlier vans: In comparing Ray's sketch with mine, above, it appears the lower plate is large enough to accept the narrower 1995 hole pattern. I plan to just drill 4 new holes and bolt it in place. I don't know about the other years, but I had seen a listing from some aftermarket company, where the part number for 1994 and 1995 E series was the same.

[BigRigBert]

I'm in for a drivers side and passengers side swivel base for a 2008 E-350.

Thanks,
Bert

[opt overland]

Im in for a passenger one.
Thanks,

[Jsweezy]

I am in for a passenger side swivel base for a 2014 E350!

Thanks

[Jsweezy]

I am also in for a drivers side swivel base!

Thanks

[dreammobile]

Is it fact that you cant use a swivel base if the drivers side chair is power, or 4x4, because of the transfer case.

[1der]

Re: power seat - correct, not usable.

Re: transfer case shifter - seems like it can work in many applications. Check the Buy #1 thread and see what she tie and Redoval did.

[1der]

Hi All,

Checking in on all of you who expressed interest but have not yet given me a Zip Code for shipping quote, or sent money in via PayPal.

If you are interested and want to be added to the list, please include your zip code, state residential or commercial address, and if you want pass /driver/ both. That gives me enough info to send you what the shipping will be.

I am going to be on the road starting this weekend and I would prefer to have most of this settled so I only handling a few last minute quotes. If any questions, please PM me, or email me.

To the two (out of 16) of you who have already paid, Thank you!!!

[1der]

Bumping this for more attention
IF you expressed wanting any of these swivels and have changed your mind, please let me know. Usually, it is only one or two people who change their mind. This time 12 people have not responded. Something else is likely wrong and people are not getting the messages or realizing I have PM'd them. Please let people know. Thanks! Ray

Originally Posted by 1der

Hi All,

Checking in on all of you who expressed interest but have not yet given me a Zip Code for shipping quote, or sent money in via PayPal.

If you are interested and want to be added to the list, please include your zip code, state residential or commercial address, and if you want pass /driver/ both. That gives me enough info to send you what the shipping will be.

I am going to be on the road for a month starting TODAY and I would prefer to have most of this settled ASAP so I am only handling a few last minute quotes. If any questions, please PM me, email me. or call me if you have the PM I sent.

To those of you who have already paid and responded, Thank you!!!

[MSD]

HI Ray - PM sent about getting another passenger side base. Let me know.
Cheers
Mark