Swivel Seat Base GRP BUY #7

[1der]

Guess it is time for another Swivel Seat Group Buy since there are quite a few of you who want one or two, so we should be able to get to the minimum order quantity. I will get shipment info off to each of the people who have already asked but if I miss you, please post/PM me again.
PLEASE include at least your first name, it makes easier to track who is who
and lets use this thread vs other swivel base threads

For this Group Buy starting today :

Passenger Swivel for Factory Seats - $195
Driver Swivel for Factory Seats - $205
Plus shipping via FedEx Ground
Payments in by August 17th PLEASE.

Shipment expected September 21st

What I need:
1. First send me your zip code for shipping and what bases you want. I can ship a maximum two bases per box. If you have a friend nearby who also wants a base, consider combining to save on the shipping. I will send you shipping cost and payment info.
2. Payment - via PayPal or Venmo (PayPal is preferred) by August 17th.
3. Let me know if you want a Door Talon, those are $45

Thank you!! Let me know if any questions.

Install Tips:
*You will need a TORX 55 or TORX 55 Plus tool
*You will need a 15 mm socket. Everything else is pretty standard
*The install is pretty easy. If you follow my instructions posted ihere in the thread you do not have to lengthen the seat wires.
*YES, the Driver base will work with Quigley, UJOR, QUADVAN transfer case floor shifters. The Driver seat can rotate 180 degrees if there are no obstructions behind the seat. It will normally rotate 90 degrees with no issues.

[GVan]

Ray, I would like to order 1 passenger seat swivel base. Zip code is 30189. Thanks for putting this together - again. We have been talking about this upgrade since we got our van last November.

Gary T

[moregil]

1 driver and 1 passenger to 91307
Thanks
Russ

[RCR]

Plans for a passenger side Transit model?

[Bozzo]

Ray, I am stuggling a bit with the install of the driver swivel. My base literally sits on the RCM plastic cover and I have a hard time for all fasteners to engage (front screws in their holes and rear nuts on their studs) + the base is still some ways away from the floor. I have not tried to crank everything by fear of collapsing the cover. Should I remove that cover? Am I missing something?
Thanks

Bozzo
(2006 E250 cargo)

UPDATE: after some pulling and tugging on that plastic cover, it is off and allows for the base to sit on the floor just fine. Now onto rerouting the cable. Crisis averted!

[taffeys]

Ray, I would like to order 1 passenger seat swivel base.

Zip is 92056.

Thanks

Charles L

[sanee515]

trying to squeeze in here

would like driver and passenger. zip is 90638

Thank you

-shawn

[1der]

Looks like the Group Buy Threads got crossed up. Did I respond to everyone on this one?

Order for the Swivel Seat Bases has been placed and as usual I have ordered a few extras for those who are just finding out about this Group Buy.

Everyone who has PAID is in plus one person who is cash on delivery. We have enough for the group buy to go through, so no issues there. Shipment should be around Oct 10th. I have a few people who have said they want in but have not yet paid, please get your payments in. I can adjust the order quantities for another few days but after that, I am locked in.

Let me know if any questions! Thxs! Ray

[rolorun]

Are you still taking orders for swivels? I am looking for swivel seats for Mercedes Sprinter 2018 driver and passenger, and a captain seat in back. Thanks.

Rolo
92009

[rolorun]

Hi, I just read your updated post. If u have swivels left and they will work on MB Sprinter 2018 driver, passenger, and 1 captain, I am interested. If not available, would you give me contact info for vendor. Thanks! Rolo. 92009