Most will be at a minimum Lugnut centric which seems to also imply conical lugnuts but if you used your flat washered lugnuts, maybe it is not a big deal. Shipping wont be too bad, single flat rate box for the two...See if you have them and how much you want for them and let me know.
Brant new hub centric bolted to the vehicle hub and wheel centric for the new wheel cost 60.00 each. But generic are 125.00 for a set of 4. Im just trying to figure it out and talking live would be a great help. If not, I understand.
If you dont mind, texting would be easier. My cell is 8015028982.

If I remember right what I have are actually lug centric, not hub centric. They are also aluminum. I got them off Amazon. Considering how outrageous shipping is these days (I'm in TN) you may want to just buy a set of exactly what you need from Ebay or Amazon. It might honestly be cheaper than the shipping on these two I have, if I even have them. I'll try to look today. I put F series aluminum wheels on the van I bought them for and they were definitely flat lug nuts, not the conical like for steel wheels. Hope that helps!

Hey! Cool, you saw my PM quickly and got back to me, Thanks!
I am in Utah, 84065 is my zip. Question(s) Based on research and learning the language of adapters, the best approach for the old lug nut pattern and new would be both hub centric (on the axle) and wheel centric holding the wheel, specifically since the 05+ Lugs are not lug nut centric? Hope this made sense. One online shop said to just use 4 conical lug nuts to center the wheel and use 4 of the washer lugnuts to still hold on the center caps...Sound micky mouse but at least an option...
Thanks.
Tyce

I think I do. I'll look around.

Where are you located?

Hey Scotty.
My name is Tyce. I am a new member. I primarily joined the group to see of you still had those two wheel adapters that you mentioned you had left over from your build?
I am building a DIY 1980 E350 Ambulance, my first. I am using the 05+ SD axle and been doing a lot of research on adapters. Anyway I could go on but want to respect your time. Hope to hear from you soon.
Thanks
Tyce