Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×

Picture 22 of 42 from Album The 2006 Great White Home Build
Left slider window in fiberglass raised fixed top
Left slider window in fiberglass raised fixed top
Picture Added 02-09-2018 11:50 AM
Added by longboardguy

Showing Picture Comments 1 to 2 of 2
  1. TritonTamer
    07-30-2021 05:35 PM
    How'd you manage to install the 'headliner' on your top?
  2. longboardguy
    08-10-2021 02:14 PM
    I glued 3/4 inch thick wood strips on to the fiberglass using Marine adhesive from the depot. Liquid Nails adhesive does not stick to fiberglass.

    I used thin "Luan" plywood as a backing board and very short panhead screws.

    I used the cheap gray carpet rolls from the depot and their strongest spray adhesive.

    The 4 ft long ceiling panels were installed first and then the carpet was applied to the ceiling. The width was determined by using a 2 inch wide strip of the luan ply and bent into the arc of the top.

    A line drawn down the center of the ceiling and down the center of the carpet helped align the large awkward to handle piece. Easier to do with a helper.

    The side panels were carpeted before installation.
    All the materials came from the depot.

    If you need clarification or additional pictures, PM me.

This website is not affiliated with or endorsed by Sportsmobile SIP or any of its affiliates. This is an independent, unofficial site.

All times are GMT -6. The time now is 06:13 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2022, vBulletin Solutions, Inc.