Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Sportsmobile Forum > marty's Profile > Albums
Reload this Page Sully - 1990 Ford E350 EB 121K Miles - DIY Home Build
Click Here to Login


 
Page 6 of 6 « First 45 6
Sully - 1990 Ford E350 EB 121K Miles - DIY Home Build
Progression of my home build. $10k budget ($5k van / $5k build and appliances). Actual van purchase price was $2250.
Cutting a sheet metal patch.
Hole in van floor where rear ac/heater hoses ran.
The rear ac/heater unit, hoses, and ducts. Glad to cut a lil weight and have this big non-working mess outta here.
After removing the rear ac/heater unit, I'll probably use that steel roof frame for shelf storage above and may rig some cabinets below on the sides.
Removing the rear ac/heater unit. After cutting the 2 heat hoses at the engine and reconnecting the front heat hoses, I used an air compressor to...
Previously there was a T-connection that the rear heat hoses were connected to the front heating unit. I cut and pulled the rear heater hoses while...
Had to remove the air filter for access to the rear heater/ac hoses.
The 2 rear heater hoses run through a hole in front of the passenger rear well and under the body to the engine.
The remaining 2 rear heater hoses.
Gutting the rear AC/Heater unit from the ceiling. It doesn't work well and I won't have any rear passengers when driving, not necessary. In this...
Ground down the weld holes. Didn't flatten them out too much because a couple opened up when I tried too much. They're gonna get covered anyway.
I was going to seal the many small screw and bolt holes with silicone. But, it turns out my cousin is a pretty good welder so we welded all the holes...
White paint coat on floor.
White paint coat on floor.
Painted the beige rear window trims white. These seem kind of janky. I think I have to keep them though, otherwise it will be too tricky to frame and...
Primed floor to cover bare scratched metal and many bolt and screw holes.
Scrubbed down floors and walls with Simple Green HD.
Gutting, sanding, grinding.
Ripped out most of the floor, wall paneling, upholstery.
BEFORE - Day 1
BEFORE - Day 1 - Inside
BEFORE - Day 1 - Exterior
 
Page 6 of 6 « First 45 6
Disclaimer:

This website is not affiliated with or endorsed by Sportsmobile SIP or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 02:42 PM.

Contact Us - Sportsmobile Forum - Archive - Community Rules - Terms of Service - Privacy - Accessibility - RVLife - Top

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.