Awning Z-Brackets - Next Batch

[1der]

Okay, I am out of the 3 pc. Fiamma Bracket sets and have two sets of the CVT/ARB style brackets left (2 pc. for the lighter weight)

I need to know the interest in my getting another batch done. Since we are coming into spring/summer/fall season I figure some of you are thinking about awnings.

Give me a post so I can figure out if I am making anymore and how many.

We love our awning and brackets and the feedback from users is they love theirs as well.

Let me know!! Thanks, Ray

 

[Jsweezy]

I'm interested in a set of the cvt. But you already knew that.

 

[1der]

Yes Josh! (Love that "line" from the Matrix! : "But you already knew that")

 

[tigooda]

I'm interested in a set for a Fiamma

 

[MSD-SMB]

Interested in a set for the ARB 2500 awning.

 

[mbcaudill]

I am also interested in a set for Fiamma.

Thanks.

Marcus.

 

[jjuan]

I'm in for a Fiamma set

 

[glasspack]

Howdy. I would love a set of the Fiamma brackets please just let me know how you'd like to arrange payment. Thanks! -Joe

 

[maxx-ESC]

Interested in the ARB 2500 brackets, would they fit on a 98 Dodge though?

 

[pjpvi]

I just need a center bracket if possible when you make more.

Thanks
Phil

 

[surf92lb]

I'm in for a 3 piece Fiamma when available. Let me know!! Thanks. . .


Sent from my iPhone using Tapatalk

 

[Sheriffdoug]

Hi.
I too would like a set to mount a Foxwing Awning on the drivers side.
Is the set 3 piece, all gutter mount, 2 particially below and one on gutter
and up( like Sportsmobile mount)? Or just three brackets, all same?
Doug.

 

[1der]

Okay Guys!

Next batch of Z-Brackets has been ordered just in time for Spring/Summer. ETA to me is three weeks. Here is what we have coming:

15 sets of the 3 pc. Fiamma style for the E Series vans, powder coated black, SS hardware to mount to the gutters, with the black plastic caps to cover the nuts.
Cost bumped because of lower qty and other cost increases. $187 including shipping via US Priority mail. (Actually, still great price since the originals were not powder coated, did not have SS hardware, did not have protective pads or the covering plastic decorative caps)

I have two sets left of the two pc ARB/CVT brackets. I am not making anymore of these. These two are $155 each including postage.

Payment is via PayPal. I will send out a PM re: payment info.

For those who want to mount ARB/CVT - The 3 pcs set works as well. Just use the front and rear bracket set (put the middle one away for safe keeping if you score a Fiamma in the future). There is a slight bend at the top of the three pc front and rear mounts. You can mount the ARB/CVT back extrusion just below this bend or on the face of the bend. I feel the ARB/CVT awnings only need one T Bolt in each of the two brackets, but it is totally your call in mounting your awning and brackets.

maxx - No clue if they would work on a 98 Dodge. Where are you located? Perhaps someone near you is getting a set and you can see how they play.

pjpvl - Phil - Checking to see if we can include a one center pc. I expect we can - will advise.

List of interested people at this posting:
2 pc ARB/CVT -
jsweezy
Gonejpn2
MSD

3 pc Fiamma
vance
tigooda
mbcaudill
jjuan
glasspack
surf92lb
Sheriffdoug
jkackley724

Doug - These will work on either side of the rig. Check out the pics at the beginning of this thread. All three brackets clamp to the gutter, no holes in the van body. The front bracket is bent to clear the top of the door and rest against the B Pillar behind the front door. The middle and rear brackets rest against the van body. The flat resting surfaces against the side of the van have protective padding to protect the body paint.

Let me know if any questions. Thanks!!

 

[Sheriffdoug]

Okay Guys!

Next batch of Z-Brackets has been ordered just in time for Spring/Summer. ETA to me is three weeks. Here is what we have coming:

15 sets of the 3 pc. Fiamma style for the E Series vans, powder coated black, SS hardware to mount to the gutters, with the black plastic caps to cover the nuts.
Cost bumped because of lower qty and other cost increases. $187 including shipping via US Priority mail. (Actually, still great price since the originals were not powder coated, did not have SS hardware, did not have protective pads or the covering plastic decorative caps)

I have two sets left of the two pc ARB/CVT brackets. I am not making anymore of these. These two are $155 each including postage.

Payment is via PayPal. I will send out a PM re: payment info.

For those who want to mount ARB/CVT - The 3 pcs set works as well. Just use the front and rear bracket set (put the middle one away for safe keeping if you score a Fiamma in the future). There is a slight bend at the top of the three pc front and rear mounts. You can mount the ARB/CVT back extrusion just below this bend or on the face of the bend. I feel the ARB/CVT awnings only need one T Bolt in each of the two brackets, but it is totally your call in mounting your awning and brackets.

maxx - No clue if they would work on a 98 Dodge. Where are you located? Perhaps someone near you is getting a set and you can see how they play.

pjpvl - Phil - Checking to see if we can include a one center pc. I expect we can - will advise.

List of interested people at this posting:
2 pc ARB/CVT -
jsweezy
Gonejpn2
MSD

3 pc Fiamma
vance
tigooda
mbcaudill
jjuan
glasspack
surf92lb
Sheriffdoug
jkackley724

Doug - These will work on either side of the rig. Check out the pics at the beginning of this thread. All three brackets clamp to the gutter, no holes in the van body. The front bracket is bent to clear the top of the door and rest against the B Pillar behind the front door. The middle and rear brackets rest against the van body. The flat resting surfaces against the side of the van have protective padding to protect the body paint.

Let me know if any questions. Thanks!!

G'day.

PM me payments details and approximate shipping weight, please.

Doug

 

[gnty]

Im in for a set for a Fiamma, but just to confirm that these will still work with a fixed top?

 

[1der]

Im in for a set for a Fiamma, but just to confirm that these will still work with a fixed top?

So long as there is a gutter exposed, it should work, this pic should give you an idea of the clamping surface needed:

 

[maxx-ESC]

maxx - No clue if they would work on a 98 Dodge. Where are you located? Perhaps someone near you is getting a set and you can see how they play.

Thanks, I'm in Seattle if anyone close by is getting brackets let me know

 

[gnty]

So long as there is a gutter exposed, it should work, this pic should give you an idea of the clamping surface needed:

View attachment 11266

Awh shoot, i was afraid of that. I'm looking at pics of the cruiser top and looks as though the top goes right up close to the drip rail.

If anyone with a cruiser top can confirm our findings for sure would be super helpful?

 

[1der]

How about mounting right to (through) the fiberglass top with some nice looking, but stout backing plates?

One concern might be the curvature along the side of top and the need for a spacer of sorts, but if mounted closer to the lower edge it might work. Then you could use the brackets that come with the Fiamma itself. I have a an extra set if you need them.

 

[dick-SMB]

Count me in for a 3 Piece.
Thanks

Okay Guys!

Next batch of Z-Brackets has been ordered just in time for Spring/Summer. ETA to me is three weeks. Here is what we have coming:

3 pc Fiamma
vance
tigooda
mbcaudill
jjuan
glasspack
surf92lb
Sheriffdoug
jkackley724