Complete Performance Package (WTD)

[WeldTecDesigns]

We finally have our 2 wheel drive complete Performance package available online. For all you guys with 2x Ford Vans that want to run bigger tires along with a significantly improving overall ride, this is the kit for you.




http://www.weldtec-designs.com/product/ ... e-package/

 

[Nick-SMB]

I have the Camburg PKG and it does deliver an outstanding ride. This look nearly identical to it or is is better and if so how?

 

[WeldTecDesigns]

I have the Camburg PKG and it does deliver an outstanding ride. This look nearly identical to it or is is better and if so how?

The kits are very similar to each other, except in price. They make great products and we sell some of their stuff, however I have never driven a van with their suspension so i may not be the best to ask. This kit offers rear leaf springs which would be the significant improvement to overall ride and comfort.

If your thinking about adding our springs to the rear of your van, We would be happy to assist you with that. It would be a huge improvement over stock springs with a block. While we are at it we could upgrade your shocks to fox and you could start comparing for yourself.
Thanks....

 

[Highball]

I had a chat with WTD earlier today... just waiting on polishing the order. I was very impressed with the input. Looking forward to having your kit on my van!

:b5:

 

[PinkTaco]

I too have a Camburg Baja kit on my E250 and am interested in the cost of your springs and the amount of lift the provide over stock. Your kit looks great btw and I probably would have gone this way had I known. The rear blocks are definitely the weak point in Camburgs deal.

 

[WeldTecDesigns]

I too have a Camburg Baja kit on my E250 and am interested in the cost of your springs and the amount of lift the provide over stock. Your kit looks great btw and I probably would have gone this way had I known. The rear blocks are definitely the weak point in Camburgs deal.

Here is the link to the springs.
http://www.weldtec-designs.com/product/ ... pring-kit/

 

[WeldTecDesigns]

suspension

We just finished up this kit! Looks great on 315's

Heads up pic with a stock van......

 

[MSD-SMB]

Looking good.

 

[REDOVAL]

:d3: Saw this in person last weekend, looks great with the 315s.

Scott

 

[rallypanam]

My plan for all my meatspace friends to have vans is continuing to make progress. My good friend Art's van at Jeremy's shop yesterday.. Formerly bone stock, just bought it a week ago!

 

[WeldTecDesigns]

Art was really happy with his new kit! Took him for a good ride to show him what it is capable of. Its really going to look great with wheels and tires!....
Thanks for the referral Rob.

Who is next........

 

[rallypanam]

Here's my buddy's van with proper wheels and tires!

 

[MSD-SMB]

Very nice!!!

 

[Jsweezy]

Looks super good, definitely the route I was leaning towards with my other van because the 4wd conversion was just gonna cost too much.

 

[wadewaydo]

Swing out Spare Mount

Not to hi-jack the thread.... but this spare tire carrier mount looks interesting. Any photos of it installed on a van?

 

[BajaSportsmobile]

That is the unit we use for our swing mounts. Off Road Warehouse in San Diego stocks them.

They can be welded in place, or as we do, installed in a receiver tube.

They are very stout and have minimal flex, less so then what they are mounted to.

 

[WeldTecDesigns]

Baja Grocery Getter. 6" lift

Hey van world.... we wanted to keep you posted on what's going on in the shop lately.
This is our latest build with our complete performance package! This Majestic beast weighed in at over 8000 lbs. After a test drive it was easy to tell that the leveling kit previously installed was pretty rough although ride, although it did allow for slightly bigger tires. Now it was time for bigger tires and to improve the overall ride... With that being said there is only 1 choice.....
WeldTec Designs Complete Performance Package!:d8:
In the front we did the Baja Grocery Getter 6" suspension package with Fox shocks BY Agile Off Road. A set of limit straps just in case this van goes air born. To finish off the front we added a Fox steering stabilizer. With this kit as with most of the builds we do, the sway bar was eliminated.
In the rear we did our custom long travel leaf springs with a little more love due to the more then 5000 lbs of van living area. Fox shocks were installed on the rear to keep guest fast asleep while hitting the bumps.:b5:
To complete this project we added 17" American Racing ATX Mojave 2 with 285x75x17 BFG KO 2 tires.



This was another fun build, We are always excited to put another van on the streets. This one is Headed back to Las Vegas. Thanks for the business and we hope you enjoy your new suspension James

WTD

 

[Adventurezoutside]

I have the Camburglar lift, It rides great but needs rear springs to complement the front off road, Whats the price on the rear springs? I may upgrade my front springs when I move from the 265 tire to the 285, It seems to be sagging a tad.

 

[WeldTecDesigns]

ford van suspension by Weldtec Designs

I have the Camburglar lift, It rides great but needs rear springs to complement the front off road, Whats the price on the rear springs? I may upgrade my front springs when I move from the 265 tire to the 285, It seems to be sagging a tad.

We would love to get your van riding smooth:
E-Series Van Rear Leaf Spring Kit - Weldtec Designs

Let us know when your ready, there is a lead time on custom springs.

WTD

 

[Tracker926]

WeldTec, that complete suspension kit looks like something I would be interested in for my 2WD 2012 E150. What do you think would be a fair cost for the labor to install, ( ballpark)? I am in east Tennessee and would have to find a reputable shop to do the work.