Econoline Swivel Seat Bases - Who wants them??

[1der]

Okay! Got the word back and we are good to go on the swivel seat bases.

These are Ford bolt pattern specific, match the bolt pattern on the floor and accept the stock seats with the proper angle, no messing around with drilling holes.. These are high quality units. I have installed these in a couple of our own vans and they have worked great.

Passenger $185 each
Driver $190 each

Shipping cost will be calculated from San Francisco via FedEx Ground.

I know there were a number of people interested. Let's get the list going here on this thread so I can get the order put together. As soon as I have a combination of 10 units we are good to go!

Let me know if any questions! Thanks.

Pass Side:


Driver Side:


thanks!

Ray

 

[mikracer]

Are the driver swivel bases only for non power seat models or will power seats bolt up to them?

 

[86Scotty]

Ray, you are the man! I don't need em now but inevitably will. Thanks for taking charge on this.

:b5:

 

[1der]

Man,, postiing pics is frustrating when they appear upside down - not sure what I am doing wrong :b2:

Here are some more shots, click view the image if they are not orientated correctly. Thxs.

 

[ert01]

I'll take a passenger side one! If we could do USPS shipping instead, I would be willing to pay more... FedEx and UPS are BRUTAL when they cross the border to Canada but USPS is always seamless and smooth.

Please let me know if this is something we can work out as I'd LOVE to get my hands on one!

 

[1der]

Ert01 - We will figure it out!

 

[audisnapr]

Hey Ray - any chance they can hook me up with just the arm that releases the seat from the stationary position and allows it to rotate? For whatever reason it's missing in the new van.

 

[shenrie]

im in for 1 driver and 1 passenger for a 2003.

thanks for putting this together ray!!

 

[TheLetterJ]

Do these raise the seats at all?... that would be a good thing. Direct bolt in on a '98?

 

[1der]

Do these raise the seats at all?... that would be a good thing. Direct bolt in on a '98?

These put the seats at pretty darn close to stock height after install, maybe a .25 to .5" higher? I remember measuring the heights before and after install and it was really close to stock.

 

[TheLetterJ]

I'll take 1 driver and 1 passenger. How would you like payment and when do you expect them to arrive?

 

[Tomboy-SMB]

I'm in for a passenger swivel for a 2003.

 

[1der]

Are the driver swivel bases only for non power seat models or will power seats bolt up to them?

Pretty sure the power seats bolt up as well. Post a or send me a pic of the seat base you have and I can probably tell.

 

[1der]

Hey Ray - any chance they can hook me up with just the arm that releases the seat from the stationary position and allows it to rotate? For whatever reason it's missing in the new van.

I'll see what I can do. Send me a pic of what you have now. There may be some other parts missing as well?? (spring, pivot, etc.)

 

[arctictraveller]

Man,, postiing pics is frustrating when they appear upside down - not sure what I am doing wrong :b2:

Turn the van upside down and retake the photos............

 

[clubnobbie]

I'm in for a Passenger side. Driver's side won't work with 4X4, right?

 

[1der]

I'm in for a Passenger side. Driver's side won't work with 4X4, right?

Sometimes the driver's side work. Depends on location and height of the shifter.

 

[hermosadae]

Hay Ray,
I'm in for a passenger side setup....2009 model

 

[ert01]

I'm in for a Passenger side. Driver's side won't work with 4X4, right?

Sometimes the driver's side work. Depends on location and height of the shifter.

My shifter is way out near the middle of my van... Is there any way to measure and confirm if the drivers side swivel will work with it? Cause I'd get one for the drivers side too if it'll work!

Oh yeah and my van is an 02 in case that matters

 

[9pb9]

Passenger 2011 plez.