Re: How thick is the Voyager top?
I think that's perhaps the top sitting on top of an uncut van roof. It looks to me like the actual fiberglass skin of the top is around 3/16"-1/4", and then there are wood stiffener ribs (you can see one in the cutout). There would be a thin fiberglass skin on the lower side of the wooden stiffener ribs too.
This is similar to the PH top construction on my '97 SMB, although on that the ribs were thinner but I think more numerous. It's also about what I would expect on a fiberglass top.
I don't know if yours may have an additional liner (i.e. something glossy on the inside) or perhaps carpet or ? as an inside "looks" surface.
|