E350 factory bench seats in a E150

[Lilnuts2]

I have the front 3 factory passenger seats out of my 2002 ext passenger van.
I'm wanting to give them to a good home. I assume that they will also fit the E 150 vans. Does anyone know this for a fact? If anybody in the Denver area wants 3 bench seats with brackets for free. 2 of the three have never been installed.

[carringb]

Rows 2 and 3 are the same. Row 4 has a wider bracket spread, so it cannot be mounted in the forward rows without drilling holes and adding backer plates for the passenger side mount. Or if the buyer is adding a 4th row, then both brackets will need to be drilled and tapped. The bosses and backing plates are most likely already there however.

[Lilnuts2]

carringb, do you know if the 1st row seat mounts are the same floor mounts for the E150 and the E350. I know the 4 row is the widest. I have one bench that is a little narrower then the 4th, and 2 benches that are the same. Sounds like the one that is a little narrower then the 4th is the front bench

[carringb]

Row 2, the first bench, has an intermediate bracket spread. Wider then row 3, narrower than the last row. Also row 2 should have the hip-point mini-seatbelt-receptacle for the seatbelt next to the door.