Hello every one Need some info please

[jds]

Hi, new here.
I have a 1992 Ford E350 passenger van.
Its pretty rusted out (live in South Dakota lots of salt) Im trying to figure out what years are compatible with it to replace doors and fenders on it.

Also what size sheet metal i should use to replace a hole in the driver side floor under the peddles.

Thanks for the help, I look forward to here form you all and hope to help out in the future.

[BCam]

You may not want to go this route but you can get replacements for the whole floor pan:

https://www.carid.com/ford-e-series-floor-pans/

There are videos on YouTube showing the replacement process. It does require welding.

Otherwise, I'd patch with something that's similar in thickness to the original floor.

[MSD]

For doors anything from 1992 to 2007 will work. The are all the same I have a 2000 and 2004 all the doors are stamped 1992.

[jds]

Ok, Thanks for the great info. I found a 2005 van with good doors for 100 each ,hope thats a good price. Wont be elec like i have but to keep the dust out from gravel roads ill roll the window down manually lol!

The hole is right on the fender well and floor on left side of the drivers feet. I put for now but i dont feel its doing much on its own. Ill see what the recycle place has. Rest of the floor in the van is good from what i have seen and i removed the rubber floor since they tend to hold Moisture under them with out humidity!

Thanks for the help!

[BCam]

I ran across this on Woot this morning in case you need them:

https://tools.woot.com/offers/red-ho..._cat_tool_3_17