Does anyone know the size and/or a source for replacement wheel studs for Correct Track wheel spacers? I bought them direct from Correct Track in 2004 which has since gone out of business. Over the years the threads have worn on several of the studs so I'd like to replace them all. I'm due for rear brakes so it's a good time to replace the studs since the spacers need to come off anyway.
Does anyone know the size and/or a source for replacement wheel studs for Correct Track wheel spacers? I bought them direct from Correct Track in 2004 which has since gone out of business. Over the years the threads have worn on several of the studs so I'd like to replace them all. I'm due for rear brakes so it's a good time to replace the studs since the spacers need to come off anyway.
They make the aluminum ones that they use on RV’s. U-Joint has steel ones but the studs may be the same.
__________________
2003 Ford E-350SD 4x4
V10 / 4R100 / NV271
Front Axle - 1 Ton Spec Dana 60/King Pin/Open Knuckle/High Steer
Rear Axle - 1 Ton Spec Dana 60/Full Floating
Eaton E-Lockers Front And Rear/4:10 Gears
ARB Differential Covers - Nodular Iron With Dipstick And Drain Plug
Leaf Spring Suspension Front And Rear
46 Gal Transfer-Flow Fuel Tank
ExtremeAire Magnum Air Compressor
Reunel Rear Bumper
On And On ...
Or, you can knock (press) out a stud and take it to a good auto parts house and they can match it.
Mike
__________________
Alaska to Key West, Labrador and more
Prostate cancer survivor. See Thread Prostate cancer and Sportsmobiles
2015 VW GTI 2020 Fiat 124 Spider
2012 E250 Hitop camper
Thanks everyone for the input. I contacted SMB West and Hendersons. SMB didn't know the size and Hendersons doesn't sell the studs separate from their wheel spacers. My plan is to pull one when I'm ready to do my brakes and hit an auto parts store. I also saw that ARP makes wheel studs so I may contact them as well. I'll post an update once I have more info.