|
10-22-2014, 05:55 PM
|
#1
|
Senior Member
Join Date: Jul 2014
Location: Portland, Oregon
Posts: 179
|
PNW Boat Works, a Bartender build.
Something I thought I would share, my other passion wood and boats.
Lots of projects going on but lots of things getting accomplished.
Working on a solid Sapele table, 24x12 turning out really nice with free floating tenon joints. Tomorrow I should be able to mount the top, sand and finish. I am not sure on what finish I'll be using. I love the beauty of Sapele so something clear, poly or varnish. I'll post pictures of this little gem. Something I am happy to have spent time completing.
I also have been working on some replacement boat parts on a 72 Willard. Pieces that have gone missing after several owners. V birth rails for the filler cushions. Blocks for the swing up berth in the salon. All being completed from teak. I'd like to stain it slightly as the teak in the boat is red. Replacements are turning out nicely. Pictures to follow in the next few days.
On to the Bartender.
Starboard and Port ply now has 6oz fiberglass that has been trimmed to size. Today I worked on dry fitting the spray rail, using 1/4" lag bolts, shim washers on the backside. I think I am going to run down some peel ply and just fill the backside with epoxy. I haven't yet made that decision but will by tomorrow.
Most recent pictures on
https://www.facebook.com/PNWboatworks?ref=hl
|
|
|
10-22-2014, 08:20 PM
|
#2
|
Member
Join Date: Jan 2009
Location: Bend, OR
Posts: 46
|
Re: PNW Boat Works, a Bartender build.
Cool. I, too, build wooden boats and usually have one on top of my 06 SMB. I get way more comments on the kayaks or canoes up top than on the SMB, but I guess that almost everyone in Bend, OR has owned, been in, or wanted a SMB due to the people that live here. Check out https://www.facebook.com/eagerbeaversurfco for the latest in my wooden surfboards and standup paddle boards.
|
|
|
10-22-2014, 10:25 PM
|
#3
|
Senior Member
Join Date: Jul 2014
Location: Portland, Oregon
Posts: 179
|
Re: PNW Boat Works, a Bartender build.
Way cool, thanks for sharing. Great finish job! I am thinking of building a few for the waters around here for next summer. Need to make room in the shop!
|
|
|
11-17-2014, 05:09 PM
|
#4
|
Senior Member
Join Date: Jul 2014
Location: Portland, Oregon
Posts: 179
|
Re: PNW Boat Works, a Bartender build.
What an amazing week at PNW Boat Works last week. Finally finished up the spray rails on both sides of the boat. Scarfed the joint in the white oak and mounted today. Last week I decided to test the limits of perfection and made a chair. What an experience. You'd have to see the chair to understand all that went into it and how nice it is. Needless to say I really enjoyed the process and learned quite a bit throughout. Next step for the BT is to begin the process of putting the bottom on. I'll start that tomorrow. Starting with the bow and working my way back. I'll be allowing a full day to mount the bow panels. They need some real help to make the bend that is needed
|
|
|
11-19-2014, 04:30 PM
|
#5
|
Senior Member
Join Date: Jul 2014
Location: Portland, Oregon
Posts: 179
|
Re: PNW Boat Works, a Bartender build.
The impact of hanging an eight foot sheet on the frames. It was a good day! By Friday the bow should be complete!
|
|
|
11-20-2014, 04:23 AM
|
#6
|
Senior Member
Join Date: May 2010
Location: Coastal South Carolina
Posts: 369
|
Re: PNW Boat Works, a Bartender build.
Keep up the good work. I for one would like to see more pics posted up. Cant wait to see you turn it over!
|
|
|
11-20-2014, 04:15 PM
|
#7
|
Senior Member
Join Date: Jul 2014
Location: Portland, Oregon
Posts: 179
|
Re: PNW Boat Works, a Bartender build.
I have more on my facebook and website. Pnwboatworks.com. I'll try to post more as things progress. Tomorrow illt be installing the other half of the bow panel. Maybe (maybe) I'll start on some of the other panels as well.
|
|
|
12-11-2014, 02:43 PM
|
#8
|
Senior Member
Join Date: Jul 2014
Location: Portland, Oregon
Posts: 179
|
Re: PNW Boat Works, a Bartender build.
Great progress on the BT over the last few days. Finished the bottom panels, filled the screw holes, taped the seams and laid down a layer of 6oz fiberglass. I decided since I am building this to be beachable to double up on the glass around the Keel so I have about two feet of fiberglass running down the center. I'll be mounting the keel, chine and then another layer of epoxy to fill in the weave. Just a few weeks away from flipping her!
|
|
|
02-18-2015, 05:55 PM
|
#9
|
Senior Member
Join Date: Jul 2014
Location: Portland, Oregon
Posts: 179
|
Fresh Paint
Well - today was a great day! Put down the first coat of bottom paint on the BT 20.5. Found out I still have a little work to smooth out the bottom to my liking but it really came out quite nicely. I am looking forward to sanding (yes I said that...hit me in the head with a tack hammer) and putting down another coat. I was surprised as to how little I used in paint, it really went the distance. About 32 oz would have had some left over, made way too much but better that than have to wait another 30 minutes of sweat time. I was happy with the cut line too. I'll be adding a Navy boot too.
|
|
|
03-19-2015, 08:43 PM
|
#10
|
Senior Member
Join Date: Jul 2014
Location: Portland, Oregon
Posts: 179
|
Update
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|