|
|
02-01-2015, 10:22 PM
|
#1
|
Member
Join Date: Apr 2013
Location: Draper Ut
Posts: 59
|
Sand and tire pressure
How low do you go? I am planning a trip into white pocket and all the trip reports leave me felling a bit unsettled. Is 18-20 psi really smart in a 10,000 rig ? Have you been to white pocket ? Should I be afraid ? Id love to pull our SMB trailer as well but do not think that is an option until I scout out these roads. I have been talking with folks from kanad blm in regard to road conditions after Friday's storm the sand shoul be great February 14,15,16 when we are going ....... Granted the weather holds.
Thanks
Jonathan
|
|
|
02-02-2015, 08:55 AM
|
#2
|
Senior Member
Join Date: Aug 2007
Posts: 386
|
Re: Sand and tire pressure
I suggest starting around 30psi and if you find this difficult going drop down to 20-25. This may vary with tire type/size. Also make sure you have a method to recover vehicle if tire pressure doesn't work. Maxtrax, winch/PullPal, 2nd vehicle, etc..... Nice to experiment with these pressures prior to being needed.
|
|
|
02-02-2015, 09:14 AM
|
#3
|
Site Team
Join Date: May 2007
Location: Southern New Mexico
Posts: 10,179
|
Re: Sand and tire pressure
Do you have a good (high CFM, 100% duty cycle preferred) compressor, or a PowerTank?
Herb
__________________
SMB-less as of 02/04/2012. Our savings account is richer, but our adventures are poorer.
|
|
|
02-02-2015, 10:06 AM
|
#4
|
Senior Member
Join Date: Jan 2009
Location: Corvallis, OR
Posts: 5,302
|
Re: Sand and tire pressure
I run 8 rear (since there's twice as many tires) and 15 front in the sand.
__________________
2000 E450 dually V10 wagon
|
|
|
02-02-2015, 10:09 AM
|
#5
|
Senior Member
Join Date: Feb 2014
Location: Kitty Hawk
Posts: 381
|
Re: Sand and tire pressure
12lb to start off.....but I am only 2wd
never blown a bead
|
|
|
02-02-2015, 11:17 AM
|
#6
|
Member
Join Date: Dec 2012
Location: Ventura County, California
Posts: 88
|
Re: Sand and tire pressure
I went to White Pocket last October on my way to Canyonlands NP. My SMB is a Sprinter, but I carry a dual-sport KTM on the back. Left the SMB on the pavement and rode the bike in, but hated every second of it. I hate riding in sand, and it was nothing but deep, loose, dry sand. There were 16.6 miles of it, but the worst was the 9.5 miles from where you turn north at Pine Pockets. The photos show what to expect.
There were a few 4x4s in the parking at the end, and I passed one or two along the way. They didn't look like they were having any trouble. I talked to a local who said you could make it in a 2-wheel drive, but you have to know how to drive in sand. Also, it would have to be very high clearance.
After all that, I was frankly not so impressed by the area, but I didn't hike more than about a mile, being burdened by my motorcycle gear, and not wanting to leave my bike alone for too long.
- Steve
|
|
|
02-02-2015, 02:20 PM
|
#7
|
Senior Member
Join Date: Nov 2012
Location: Switzerland
Posts: 1,019
|
Re: Sand and tire pressure
Streve's pictures show pretty much how the trail is. I drove it some years ago and it was about the same trail condition. There is one spot where you have to go up a hill. The return is steeper, so taking a look at the trail walking it before to go down could be a good idea.
__________________
Travelling in VivaLaVida (custom 2010 6.0 Ford E-350 Extended with U-Joint 4WD conversion)
|
|
|
02-02-2015, 09:36 PM
|
#8
|
Member
Join Date: Apr 2013
Location: Draper Ut
Posts: 59
|
Re: Sand and tire pressure
I am 4x4 EB on 285/70/17 toyo mt and the sand is damp due to the Friday/ Saturday storm. I do not have a fast way to air up I'm counting on about 15-20 minutes per tire
On board air is on my short list. I will be happy to share my experience with you guys. I Keep telling myself the guide service in the area drive stock suburbans ... It's my extra 3000lbs that I fear.
I'm not a fan of riding in sand either. O7 640 adv or the o9 990 adv now on the crf450 with a paddle it's a different game completely.
We will have cold beer a high lift jack and two men to dig and a couple of ladies to supervise..... I think it will all be ok. But it feels better to hear you guys say it.
Thanks and please keep the advice and first hand accounts coming.
|
|
|
02-02-2015, 09:46 PM
|
#9
|
Senior Member
Join Date: Feb 2013
Location: San Francisco/Nevada City
Posts: 3,769
|
Re: Sand and tire pressure
Based on those pictures, you probably won't 'need' to deflate... But might want to as it will smooth out the ride from the washboard.
30psi should be fine, you won't need to go any lower than that.
|
|
|
02-02-2015, 09:47 PM
|
#10
|
Site Team
Join Date: Jun 2010
Location: Covina
Posts: 1,317
|
Re: Sand and tire pressure
I run 30psi in all 4 and it seems to work. I have also done it at 70 psi in the duns on the Mohave road and it was doable but not fun. I redid the springs on my 640 and it went from a pita to floating through the dunes and flying off them.
__________________
Kelly, Claudine, Sophie dog, Bell the redheaded step child and Gooseberry RIP.
Most the time the Copilot is Now Sophie dog the noise maker.
2000 7.3 PS Quigley/RB30 with a 6 window poptop.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|