Connector below steering wheel

[Matt24]

Hi,
I want to convert the rear turn signals in yellow for the German TÜV. Therefore I take the turn signal and a Relais. I found a connector below the steering wheel with pure turn signal without the brake. To have a proper installation I wanted to buy the counter part at Ford. But they cannot find it. The plug is below the steering wheel next to the fuse box. Does anyone know maybe which counterpart would fit? There are the turn signals and two plus, one permanent and the other with ignition. In total it has 6 connectors.

[mgmetalworks]

Originally Posted by Matt24

Hi,
I want to convert the rear turn signals in yellow for the German TÜV. Therefore I take the turn signal and a Relais. I found a connector below the steering wheel with pure turn signal without the brake. To have a proper installation I wanted to buy the counter part at Ford. But they cannot find it. The plug is below the steering wheel next to the fuse box. Does anyone know maybe which counterpart would fit? There are the turn signals and two plus, one permanent and the other with ignition. In total it has 6 connectors.

Most likely part of the Yazaki YESC line of connectors. 6.3mm terminals

maybe this one...
https://connectors-catalog.sys.yzk.c...list&select=XX

[carringb]

Since it looks like you have an '09+, you might find this useful. Unfortunately they don't list the connector number, but they do describe the relay requirements and where to split the signal at the rear:

https://madocumentupload.marketingas...f9248&v5=False

[Matt24]

Thanks very much. I guess this will help.

[Mikerson]

https://www.motorcraft.com/content/d...-Book-2016.pdf

Looks like maybe a wtp-363? Looks like the same one MG identified.

The six cavity connectors start on P25.

[Matt24]

Thanks man. I will try again with Ford see if they can deliver this one.

[Scalf77]

try

https://nexelec.com/YAZAKI-7283559140/

and you will need terminals

7116-4120-02 = 0.8 to 1 mm2
7115-4121-02 = 2.5 mm2
7115-4122-02 = 4 mm2

[Matt24]

I converted to yellow turn signals finally. Works fine.