|
|
08-28-2021, 01:42 PM
|
#91
|
Senior Member
Join Date: Aug 2017
Posts: 229
|
ebay reminder - ends Sunday
Ok folks, thanks for the feedback -- it sounds like the bulk of the interest was at the lower end of the price range.
I've got a larger shop looking at whether they'd want to make these (for cheaper, in theory), and like I mentioned, we're trying to produce two sets of these. The ebay listing is the best way to ensure you get one; otherwise I'll update if / when we get the second set produced, and then see if we can work on individual windows. (I saw your updates @Michael, @aarcaris, and @Stone Cite - thx)
https://www.ebay.com/itm/284416766046
|
|
|
10-04-2021, 10:54 AM
|
#92
|
Senior Member
Join Date: Aug 2017
Posts: 229
|
Window covers available
Update: the initial batch is ready to ship! This is all that will be produced for the time being.
I'm checking with the guys who expressed specific interest first (@vwteleman @aarcaris and @stonecite), but if they "pass," then the covers fitting the following windows will be available for purchase, first come/FS'd:
1,2,4,5,10,11
4,5,10,11
1,2,4,5,10,11
Pricing is $100 per window (plus shipping), and includes the straps, buttons, and rare-earth magnets all sewn into the covers. If I have enough, I'll also send the matching screw-snaps (2 needed per cover) and van-side magnets needed for 10&11.
Let me know any questions.
|
|
|
10-04-2021, 08:41 PM
|
#93
|
Senior Member
Join Date: Aug 2017
Posts: 229
|
pic requested by a member
Here's a pic of #4 showing the notch for the pop-out mechanism.
|
|
|
10-05-2021, 06:21 PM
|
#94
|
Senior Member
Join Date: Aug 2017
Posts: 229
|
Update:
I've made 3 shipments, so maybe there'll be some reviews/feedback next week; meanwhile, the following windows are now available (just these). I've had a couple of inquiries for two at a time, but I'd prefer to send 4+ to people to minimize packing, so let me know interest, and please include your address for shipping estimates. And in any event I'll get back to those of you who've contacted me, in order, if no one takes these full-er sets. Email t e x n y c at gmail .
4,5,10,11
1,2,4,5,10,11
|
|
|
10-12-2021, 07:14 AM
|
#95
|
Senior Member
Join Date: Aug 2017
Posts: 229
|
2 updates:
1) For those who have received curtains, just fwiw, when I was installing the screw-in buttons in my van, in a few spots I used a cut-off wheel to shorten the screws a little to make sure they didn't make contact with whatever's behind the sill / headliner. Just pre-drill if you do that (or I recommend pre-drilling for all of them to be safe).
2) I've got the following left:
10,11 and
1,2,4,5,10,11
|
|
|
10-12-2021, 10:57 PM
|
#96
|
Senior Member
Join Date: Apr 2016
Location: Oregon
Posts: 1,186
|
Nice work on those, scuba. I’m curious about the magnets. Are they holding to the window metal through the plastic trim?
.
__________________
"PhoTo" - 2014 Ford E350 5.4L RB - Agile 4x4 - CCV Poptop
|
|
|
10-13-2021, 07:46 AM
|
#97
|
Senior Member
Join Date: Aug 2017
Posts: 229
|
After experimenting, we used magnets only in 2 places: 1) around the top and sides (eight total I think) to secure the driver and passenger covers to the metal surround, and 2) on the sides of the rear window covers (rear doors) to hold them into the plane of the sill. (The rear windows are angled enough that otherwise the cover hangs inward. And in that case, we expoxied matching magnets (included w/ purchase) on the backside of the window trim on each side, so you don't see anything from inside the van, but when deployed, the magnets in the hem of the cover snap the cover smartly into place.)
For everywhere else, screw-in snaps are used. These worked best to do the double-duty of pressing the top hem against the window pane and holding the stowed window against the top sill.
Quote:
Originally Posted by Otter
Nice work on those, scuba. I’m curious about the magnets. Are they holding to the window metal through the plastic trim?
.
|
|
|
|
10-13-2021, 08:02 AM
|
#98
|
Senior Member
Join Date: Aug 2017
Posts: 229
|
And just to make sure I answered your question, there aren't magnets in the others-- the way we sized them and friction keep them in the window when deployed.
|
|
|
10-13-2021, 10:14 AM
|
#99
|
Senior Member
Join Date: Apr 2016
Location: Oregon
Posts: 1,186
|
Thank you for the info, Scuba. I considered magnets for mine but went with snaps instead. I may use them in my passenger and driver windows since the metal is more accessible. Having shades at the ready is great, isn’t it? I’ve enjoyed mine a lot and am sure you all will too.
__________________
"PhoTo" - 2014 Ford E350 5.4L RB - Agile 4x4 - CCV Poptop
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|