No idea what configuration you've outlined to plumb your Rig, but may want to consider (if you haven't already) including a system to allow adding chemicals when needed.
You'll obviously be pulling water from someplace, so I would include a "Y" fitting (located just BEFORE the intake to the pump): One side of the "Y" for your water source, the other attach a shut-off valve with a 3ft small hose - so when the time comes that you want/need to run a chemical through the system you can just place the end of the hose in the bottle/container, open the cut-off valve and turn on your pump, and suck directly through your system (EX: a little bleach to sanitize, any type of water treatment, or winterizer if you'll need it). If you're mounting a water tank you'll want to rethink the strategy to accomplish the same. Properly planned, it will make these types of processes considerably easier - viod of spilling, hassle, and frustration.
__________________
TwoXentrix
"AWOL"
|