I have an SMB mounted Fiamma awning, and I have not checked the mounting bolts before. I tried to tighten the bolts that hold the mounting bracket but the bolt spins without tightening up the connection. It is not so loose that I can pull the bolt out so it must still be threaded onto the nut behind it. Do I have to take the interior apart to get to the back side of these bolts? If I do are the bolts accessible from inside the van? I don't want to start taking apart the inside and find out the bolts are inside the van body and inaccessible. I did a search of the forum and found lots of info about how bad the brackets are but there is no info about accessing the bolts from the inside so you can tighten them from the outside.
Leaving for AK on Monday and this is the last thing on my list to take care of.
Threaded Mode
